Armory Sponsor
Posted: 10/26/2009 10:15:03 PM EDT
I am wanting to go the SBR route with my RRA 9mm but am cornfused at how to do it. I see all these 5" and 10.5" barreled uppers for sale but no complete sbr rifles.......So here is my 
If i buy a complete rifle and decide to buy a 5" suppressed barrel for it, How do i go about getting the transfer done and getting my reciever marked? By the way, i am in Indiana and my local LEO will sign off on it 
|
| If the gun you buy is only a Title I firearm, you will have to "manufacture" your SBR. You file a Form 1 for approval to manufacture your SBR, you get the lower engraved with your manufacturer's info (you are the new manufacturer so it needs to be engraved with that info), then upon approval, you can buy a short upper and assemble them. If you want to buy a suppressed upper, it is likely going to be a 2 stamp gun. The only way that you can have a suppressed "short" upper on only 1 stamp is if the upper isn't really short (permanently attached suppressor that bring barrel length to 16"+). To transfer the suppressor you will file a Form 4. |
Armory Sponsor