User Panel
Quoted: Quoted: I'm pretty sure Tactical Innovations is Pike Arms and they look to be in stock... [ETA: 2 with sights in stock at time of posting] https://www.tacticalinc.com/catalog/product/id-1145 Thanks! This is going to cost me YW. FWIW I used one of their receivers in a Rugerless 10/22 build and was very pleased with it. Also used one of those ribbed barrels in a ScotWerx "Tommy Gun" build and it looks amazing. |
|
I got a shipping notice as well, I bet these go out in batches and there's probably a 3 week batch turnaround time so I just got lucky ordering when I did. Now I still have to find a receiver.
|
|
Has anyone tried one of these on a TCR22 yet? I'm assuming it works?
|
|
Got mine, and like it was said before, it transforms the rifle into something much more substantial... The stock is extremely well built and lockup is tight! I also installed one of their raised front and rear sight sets and they perfectly align with the new stock's head placement, so either tech sights or one of Samson's sets is pretty much mandatory...
|
|
After studying the way the stock locks up and how it is held in the open position... I don't think that any amount of quality duracoat/ceramic coating would hold up for any length of time...
|
|
Mine’s here. It’s glorious. Jesus, I wish I had one of these as a kid hiking around in VT. I can’t wait to shoot it with my boys. The blue/stainless does not bother me much but I will eventually get a 16 inch threaded barrel. Honestly one of my best purchases this year. Love it!
Attached File |
|
Dammit, I hate waiting. Lucked out and found a stainless 10/22 on Thursday for a good price and most of the other parts came in yesterday, stock should be here Monday.
|
|
Quoted: Mine’s here. It’s glorious. Jesus, I wish I had one of these as a kid hiking around in VT. I can’t wait to shoot it with my boys. The blue/stainless does not bother me much but I will eventually get a 16 inch threaded barrel. Honestly one of my best purchases this year. Love it! https://www.ar15.com/media/mediaFiles/112468/3F82A1B8-705E-4B32-9E94-1AFEDE5117E5_jpe-1891530.JPG View Quote Looks great! My only complaint with the Tech Sights is the peep is a little small. Great for shooting 10s and Xs in paper, not as good for steel and target transitions. |
|
|
You could always buy a reamer if you want a perfectly round hole.
A2 Large diameter aperture is .200. https://www.mcmaster.com/8930A126/ You can find metric reamers a lot cheaper, 5mm is a little under and 6 is a little over. https://www.amazon.com/uxcell-Straight-Chucking-Cutting-Milling/dp/B07K44Q3X4/ref=sr_1_4?dchild=1&keywords=6mm+reamer&qid=1617641096&sr=8-4 |
|
I’m going to pick up a silver barrel band and charging handle to help complete the look. Still undecided about the trigger group color.
Attached File Attached File |
|
Quoted: I’m going to pick up a silver barrel band and charging handle to help complete the look. Still undecided about the trigger group color. https://www.ar15.com/media/mediaFiles/54712/4D0A5D8D-56CF-4559-B525-364C6EB3A053_jpe-1894996.JPG https://www.ar15.com/media/mediaFiles/54712/9202000F-2404-41A4-9B36-849966F69FDF_jpe-1894997.JPG View Quote Nice! |
|
I received mine in the mail today.... man this thing is really nice. I am really shocked what a nice stock this is for $250.
I have plans for a custom build on this stock, hopefully will turn out nice and will post pics once its completed. |
|
Quoted: I received mine in the mail today.... man this thing is really nice. I am really shocked what a nice stock this is for $250. I have plans for a custom build on this stock, hopefully will turn out nice and will post pics once its completed. View Quote Yeah, I think these are probably actually better on the 10/22 than they are on the mini-14. It’s just “cool” which adds a lot of fun to a .22 plinker. |
|
Quoted: I’m going to pick up a silver barrel band and charging handle to help complete the look. Still undecided about the trigger group color. https://www.ar15.com/media/mediaFiles/54712/4D0A5D8D-56CF-4559-B525-364C6EB3A053_jpe-1894996.JPG https://www.ar15.com/media/mediaFiles/54712/9202000F-2404-41A4-9B36-849966F69FDF_jpe-1894997.JPG View Quote That's a good looking 10/22! I like the two tone. I'd keep the black TG as it looks good with the pistol grip. |
|
Another cool accessory I got from Samson for use on their folding stocks- qd sling mount.
Attached File Attached File |
|
Quoted: Has anyone tried one of these on a TCR22 yet? I'm assuming it works? View Quote Attached File |
|
|
|
Quoted: Yes, that's possible. But most of the holes I've ever drilled have been slightly oval instead of perfectly round. If you could replace the peep with an AR15 A2 rear that may be best of both worlds. View Quote View All Quotes View All Quotes Quoted: Quoted: Couldn't you just drill out the rear sight? Yes, that's possible. But most of the holes I've ever drilled have been slightly oval instead of perfectly round. If you could replace the peep with an AR15 A2 rear that may be best of both worlds. Or you could just buy the NoDak rear sight that already has an A2 aperture. |
|
|
I was going to do a M1 carbine, but I think I am going this way instead.
By beef with the M1 was the quality of the wood. You guys say this one also scratches easily? ETA: Samson just got a bunch of my money. |
|
Quoted: Enjoy fellas . I think those are pure shit compared to a butler creek folder . Obviously some peoples milage does vary . View Quote Attached File |
|
Does anyone know if you could put a Mini-14 handguard on a 10/22 with a B-Tm stock? Would doing so require a Mini-14 gas block? If so, could you mount a Mini-14 gas block on the front of a B-Tm stock?
I've got a "stainless" 10/22 I'm going to SBR and put into a B-Tm stock with a binary trigger. I'd love to complete the A-Team look with a Mini-14 handguard. |
|
Quoted: Does anyone know if you could put a Mini-14 handguard on a 10/22 with a B-Tm stock? Would doing so require a Mini-14 gas block? If so, could you mount a Mini-14 gas block on the front of a B-Tm stock? I've got a "stainless" 10/22 I'm going to SBR and put into a B-Tm stock with a binary trigger. I'd love to complete the A-Team look with a Mini-14 handguard. View Quote There are lookalike handguards for the 10/22 and the stock is cut so it has clearance for the barrel band. I don't have an actual mini handguard to test fit though. https://www.midwayusa.com/product/1004698557/ |
|
|
Quoted: Does anyone know if you could put a Mini-14 handguard on a 10/22 with a B-Tm stock? Would doing so require a Mini-14 gas block? If so, could you mount a Mini-14 gas block on the front of a B-Tm stock? I've got a "stainless" 10/22 I'm going to SBR and put into a B-Tm stock with a binary trigger. I'd love to complete the A-Team look with a Mini-14 handguard. View Quote I’m looking at SBRing mine. Love to see your results with a binary trigger. Do any of the 10/22 binary triggers work well? |
|
|
Quoted: An actual Mini-14 handguard is to wide for a 10/22 and will look out of place on the narrower 10/22. I actually built what you are asking about many years ago using a cut down and modded butler creek folder, a modded polymer 10/22 hand guard heat shield, and an AC556 gas block. https://i.imgur.com/JpU5xra.jpg?1 I am actually in the process of building another stainless SBR host in an almost identical setup but using a Samson B-Team folder, a Ruger (mini-14 centric) flash hider, no optic but a tech sites 10/22 rear sight. I have all the parts and started on it a month back or so but just have not had the free time to finish it. This new stainless B-Team folder host will be the "mini me" to my AC556K. View Quote We need a detailed “how to” with lots of pics. That is going to be amazing. |
|
Quoted: We need a detailed “how to” with lots of pics. That is going to be amazing. View Quote However, its going to be a bit as I am going out of town for the next couple of weeks so won't have access to my shop until I get back. Probably finish it up end of August / early September would be my best guess. |
|
How long of a barrel is needed to get past the barrel strap?
I have an SBR receiver but I think the barrel is too short |
|
|
Quoted: 10/22 with a tacticool retro look is pretty fun for desert shooting. Everybody wants to shoot it. https://www.ar15.com/media/mediaFiles/64501/FBE93F4B-6538-4CA8-B72E-3470F285D705_jpe-1816694.JPG View Quote He doesn't look happy to be out shooting that day. LOL |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.