Armory Sponsor
Posted: 7/20/2010 5:04:52 AM EDT
|
I recently purchased an AWESOME TO ME (A2M) version of this rifle and took it out shooting. I cleaned ot REALLY well before hand and when I was at the range I had two problems. One was it jammed open and I couldn't get the bolt out at all. Figured that one out. Second problem was it wouldn't cycle everytime. I'd shoot a round, it would load the next one and one of two things would happen. 1. It would jam the bullet towards the 11:00 position and chew the face of the bullet pretty good 2. It would load fine but wouldn't reset the firing pin every time. I could pull the trigger and see the charging handle move when I'm pulling the trigger but nothign would happen. I tried chambering another round and it sometimes worked, sometimes didnt. Any idea what's causing these problems? I took the bolt apart pretty well (not completly) watching a video on youtube. There is also some resistance when I'm putting the feed tube into the gun. It goes in fine about 1/3 of the way, hits a spot that feels like it might be gunked up, then goes smooth. Haven't tried removing that or cleaning it since I can deal with it. Would rather get this gun feeding properly. |
|
Yeah. Cleaned it more than anyone's cleaned it probably too. I'm triyng to find out which way the trigger spring goes now. I took a look at it and it seems to be slightly bent and I'm thinking it might be the cause of some problem. I just don't remember which way it went in. |
Armory Sponsor