[ARCHIVED THREAD] - barrel replacement

Posted: 8/27/2005 9:19:03 PM EDT

how hard is it to change the barrel and stock on a stock ruger 10/22?

is there a guide somewhere or a walk through?

i tried searching, but didnt find something

thanks

Posted: 8/28/2005 8:01:30 AM EDT

[#1]

It's easy. The only thing that holds the barrel into the receiver is a little block with two allen-head screws. Remove the screws/block, and the barrel will slide right out of the receiver. You may need to tap it gentle to force it out.

Posted: 8/28/2005 7:54:52 PM EDT

[#2]

unless you have one with the barrel band, then you would have to remove it along with the takedown screw then the v-block is all that is holding the barrel in by two allen head screws

you will have to take down the rifle though

Posted: 8/30/2005 6:33:54 PM EDT

[#3]

It's here somewhere. www.rimfirecentral.com/forums/forumdisplay.php?f=6

Edit to add: It's the easiest thing. Even installing internal action parts on the 10/22 is easy and I'm not a mechanical person.

[ARCHIVED THREAD] - barrel replacement

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - barrel replacement

[ARCHIVED THREAD] - barrel replacement