[ARCHIVED THREAD] - New PC/plate help

Posted: 7/9/2015 4:49:28 PM EDT

I just got a new carrier and plates. Carrier is from AWS and plates are Highcom 10x12 multi curves. I pushed the plates all the way to the top, but there is about a 2 inch gap at the bottom once I secure the Velcro to hold the plate in. Is the carrier too big? Plates too small? Or is this something that happens and you just have to adapt?

Posted: 7/9/2015 6:21:26 PM EDT

[#1]

What size carrier did you get from AWS?

Posted: 7/9/2015 9:03:36 PM EDT

[#2]

Large. I called them and try said that is what I would need for 10x12 plates.

Posted: 7/9/2015 10:42:06 PM EDT

[#3]

As long as they don't move around inside the carrier while you move, you'll be fine.

Posted: 7/9/2015 10:42:23 PM EDT

[#4]

Double. Tablet.

Posted: 7/10/2015 9:32:44 AM EDT

[#5]

a lot of PCs will have some play for a size smaller or larger plate, usually they have a velcro strap in there to secure the plate in the correct position.

Posted: 7/10/2015 9:37:13 AM EDT

[#6]

Large ESAPI's have a lot of room inside the AWS carrier. I had one briefly and to make my plates fit properly (snug at the top) I had to tape closed cell foam to the bottom of my plates.

Posted: 7/10/2015 8:27:55 PM EDT

[#7]

Quote History

Quoted:
Large ESAPI's have a lot of room inside the AWS carrier. I had one briefly and to make my plates fit properly (snug at the top) I had to tape closed cell foam to the bottom of my plates.

View Quote

This is what I ended up doing. Fits great joke. Thanks guys!

[ARCHIVED THREAD] - New PC/plate help

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - New PC/plate help

[ARCHIVED THREAD] - New PC/plate help