Armory Sponsor
Post your gear porn here!!!!! Part two. (Page 3 of 166)
|
The pattern is from draping a laundry bag, fishnets, ect over an object and spraying it with several colors. I did that to a ton of crap on p1.
Here is my light kit set up for AK - Thanks for giving me a reason to post pics, my batts were dead - havent used these radios much since I got into ham.... 
|
Being a contributing member means you contribute – to a TECH FORUM...
"If another mod is needed the current mod will let us know." TBK1
"If another mod is needed the current mod will let us know." TBK1
Eagle/SKD Universal chest rig 8 P-Mags 3 Glock 19 mags 1 folding knife Map, poncho, nitrile gloves, kerlix inside the velcro pouch behind the mags (deciding on med pouch now) Safariland 6280 holster, Peltor TacSport earpro, Camelbak 1.5L, not shown are some Mechanix-type gloves I've got. Not the best of stuff, but it works for me right now. That belt is obviously thin and flimsy but when I run it over top of my regular leather belt it supports the holster very well, surprisingly. A Wilderness Instructor or similar is on my list, but don't have the money to spare for it right now when I've got something that works fine for the time being. Once I find another job, a Troy rail, TangoDown VFG and hopefully an Aimpoint are going on the AR. I'm getting pretty good with irons right now since I became unemployed right about the time I decided to start saving for an Aimpoint. 
|
Thanks to scotchymcdrinkerbean for my membership.
“Nothing can stop the man with the right mental attitude from achieving his goal; nothing on earth can help the man with the wrong mental attitude.” - Thomas Jefferson
“Nothing can stop the man with the right mental attitude from achieving his goal; nothing on earth can help the man with the wrong mental attitude.” - Thomas Jefferson
Here's my SHTF chest rig, along with the companion war belt.
TT 2-piece MAV w/ X-Harness and center adapter OSOE CQB mag pouches OSOE compact VOK pouch TT single mag shingles TT vertical utility pouch 1V HSGI Nalgene pouches ATS war belt w/Specter belt TT multitool pouches (one with Gerber Multiplier and the other with G2) BH SERPA level 3 duty holster GI grnade pouch TT E&E pouch Maxpedition Rolly Polly Gerber LMFII ASEK TT double pistol mag pouch TT compass/strobe pouch The SERPA is going to get replaced with a Safariland, most likely...my M&P is almost impossible to draw from the SERPA. (It came off my duty belt.) I'm also setting up another rig for active shooter scenarios, as soon as I return to work. |
STOP RESISTING!
fla556guy: "When you have a shit-hole the answer is to flush it as fast as possible, not bathe in the shit."
fla556guy: "When you have a shit-hole the answer is to flush it as fast as possible, not bathe in the shit."
|
Originally Posted By LongShot94:
Other than being tacticool, what are the reasons for someone not in mil/le to have a plate carrier? The same reasons as someone in the military or law enforcement. |
Protego quod vallo.
Si vis pacem, para bellum.
Si vis pacem, para bellum.
| This isn't General Discussion. This forum is for technical discussion. If you don't have anything useful to add, you should strongly consider keeping your mouth shut. |
Tyranny, like hell, is not easily conquered; yet we have this consolation with us, that the harder the conflict, the more glorious the triumph. What we obtain too cheap, we esteem too lightly: it is dearness only that gives every thing its value.
|
Originally Posted By TR0N_0010:
I should have my Warbelt/1st Line done next month. Here's what i've been running for about a year-ish now: http://farm3.static.flickr.com/2736/4377730406_42dbe78c94_b.jpg Is that a sword? If so what kind. Thanks. |
|
Originally Posted By F5:
Originally Posted By TR0N_0010:
I should have my Warbelt/1st Line done next month. Here's what i've been running for about a year-ish now: http://farm3.static.flickr.com/2736/4377730406_42dbe78c94_b.jpg Is that a sword? If so what kind. Thanks. Nope.. just a good ole machete. Works great for scrub oak when i'm hog hunting. |
|
Originally Posted By LongShot94:
Other than being tacticool, what are the reasons for someone not in mil/le to have a plate carrier? Well, because they can, for starters.  Some people have them because they prefer to have the extra protection when attending rifle classes. Others have it just because they think they might need it one day.
|
STOP RESISTING!
fla556guy: "When you have a shit-hole the answer is to flush it as fast as possible, not bathe in the shit."
fla556guy: "When you have a shit-hole the answer is to flush it as fast as possible, not bathe in the shit."
|
Originally Posted By LongShot94:
Other than being tacticool, what are the reasons for someone not in mil/le to have a plate carrier? One could say the same thing about owning an AR15, AK, etc. We are Americans and though our rights are eroding away we still have some. I have armor and NOD simply because one day(hopefully not) you may be in a situation with civil anarchy and the Police will be busier than a one-legged man in an ass kicking contest. The other reason is simply because I can and therefore will. Oh yeah and they stop bullets. |
|
Originally Posted By MOS2111:
ITS A PICTURE THREAD!!!!!111  
5.11 Mini Chest Rig 5.11 Double Pistol Mag Pouch Chi-Com made Four AR-15 Mag Pouch. Bundeswehrkommando Patch from when I worked with them for a little bit. The Krauts have fun toys. The pistol mag pouch on the left side of the pic holds a Gerber Multi-tool and a SureFire C2 Centurion. |
my get me outta here goodies hsgi weesatch (level lv ceramic front & level lll steel rear) unknown double pistol pouch unknown small gp pouch (compass & pocket knife) voodoo multicam large gp pouch (IFAK) voodoo od large gp pouch (misc survival stuff) 3L camelbak weapons colt mt6400c (threaded w/ a2) aimpoint ml2, sopmod, surefire m950, kights rail kimber desert warrior emerson/neely specwar |
|
Originally Posted By 04freedom: http://carphotos.cardomain.com/ride_images/1/1002/3421/2504210061_large.jpg my get me outta here goodies hsgi weesatch (level lv ceramic front & level lll steel rear) unknown double pistol pouch unknown small gp pouch (compass & pocket knife) voodoo multicam large gp pouch (IFAK) voodoo od large gp pouch (misc survival stuff) 3L camelbak weapons colt mt6400c (threaded w/ a2) aimpoint ml2, sopmod, surefire m950, kights rail kimber desert warrior emerson/neely specwar HOLY OLD SHOULDER PADS BATMAN! You need to pick up a set of the current Wa/Wee Shoulder pads with Neoprene. Thinner profile, even more comfortable. IMHO CXS |
Topher DiMauro
You know my business, and how to get a hold of me..
You know my business, and how to get a hold of me..
|
I would be more worried about a decent holster than the profile of shoulder pads. Originally Posted By Custom-X_Sponjah: Originally Posted By 04freedom: http://carphotos.cardomain.com/ride_images/1/1002/3421/2504210061_large.jpg my get me outta here goodies hsgi weesatch (level lv ceramic front & level lll steel rear) unknown double pistol pouch unknown small gp pouch (compass & pocket knife) voodoo multicam large gp pouch (IFAK) voodoo od large gp pouch (misc survival stuff) 3L camelbak weapons colt mt6400c (threaded w/ a2) aimpoint ml2, sopmod, surefire m950, kights rail kimber desert warrior emerson/neely specwar HOLY OLD SHOULDER PADS BATMAN! You need to pick up a set of the current Wa/Wee Shoulder pads with Neoprene. Thinner profile, even more comfortable. IMHO CXS |
|
HOLY OLD SHOULDER PADS BATMAN! You need to pick up a set of the current Wa/Wee Shoulder pads with Neoprene. Thinner profile, even more comfortable. IMHO CXS Now I feel old and inadequate, I have those big ones also  (Although I switched over to the PIG carrier).
|
www.militarymustang.info
|
Well I guess I will bite... Some custom gear I built over the last couple years. Allot was made for Airsoft/Simunitions training.
This is the start of my BALCS cut vest with external Plate pouch. 
As it evolved. 
My combat belt and holster. 
This was my first piece of gear I ever made. SPEAR ELCS with some unnoticeable improvements or maybe noticeable. 
More to come on gear I did not make; everything above is completely designed and made by me with the exception of the ELCS I used another ELCS to work off of. |
|
Originally Posted By great308:
Well I guess I will bite... Some custom gear I built over the last couple years. Allot was made for Airsoft/Simunitions training. This is the start of my BALCS cut vest with external Plate pouch. http://img.photobucket.com/albums/v221/hangingchads/Airsoft/vstangsd.jpg http://img.photobucket.com/albums/v221/hangingchads/Airsoft/mcvt.jpg As it evolved. http://img.photobucket.com/albums/v221/hangingchads/Airsoft/vstsd.jpg http://img.photobucket.com/albums/v221/hangingchads/Airsoft/hydropac.jpg My combat belt and holster. http://img.photobucket.com/albums/v221/hangingchads/Airsoft/vstfrt.jpg This was my first piece of gear I ever made. SPEAR ELCS with some unnoticeable improvements or maybe noticeable. http://img.photobucket.com/albums/v221/hangingchads/Airsoft/elcs1.jpg http://img.photobucket.com/albums/v221/hangingchads/Airsoft/elcs2.jpg More to come on gear I did not make; everything above is completely designed and made by me with the exception of the ELCS I used another ELCS to work off of. Damn. Nice job. |
SKD Alpha BDU shirt Propper BDU pants Tactical Tailor Plate Carrier, coyote brown TT 2 mag carriers, coyote brown ATS medium GP pouch, coyote brown DBT admin pouch, coyote brown The only thing I don't like about the SKD top is the Mandarin collar. It won't lay flat. |
"In a time of universal deceit, telling the truth becomes a revolutionary act." -- George Orwell
كافر
كافر
My Rig: Comp-Tac Kydex reinforced belt. ATS War Belt Blue Force Gear Ten Speed Triple Mag Shingle Eagle Admin Pouch Condor Dump bag Blow Out Kit (for those special "whoopsy I just discharged a firearm into my leg" type situations) Comp-Tac Paddle Holster Blood Type Tab Cheap-O Remington Fixed Blade My Rifle: RRA Lower RRA Stock MI BUIS Stag 16" Upper EOTECH 5.11 CAA Cheap-O Rails SureFire 6P P.I.G Drop Slider MK1 |
|
Originally Posted By verderben: http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs444.snc3/25500_1369150233833_1384040896_30990224_4405471_n.jpg My Rig: Comp-Tac Kydex reinforced belt. ATS War Belt Blue Force Gear Ten Speed Triple Mag Shingle Eagle Admin Pouch Condor Dump bag Blow Out Kit (for those special "whoopsy I just discharged a firearm into my leg" type situations) Comp-Tac Paddle Holster Blood Type Tab Cheap-O Remington Fixed Blade My Rifle: RRA Lower RRA Stock MI BUIS Stag 16" Upper EOTECH 5.11 CAA Cheap-O Rails SureFire 6P P.I.G Drop Slider MK1 Are you running any secondary mag carriers? -dave |
"Throw some candy to the children..."
|
Originally Posted By DKlic6:
Originally Posted By verderben:
http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs444.snc3/25500_1369150233833_1384040896_30990224_4405471_n.jpg My Rig: Comp-Tac Kydex reinforced belt. ATS War Belt Blue Force Gear Ten Speed Triple Mag Shingle Eagle Admin Pouch Condor Dump bag Blow Out Kit (for those special "whoopsy I just discharged a firearm into my leg" type situations) Comp-Tac Paddle Holster Blood Type Tab Cheap-O Remington Fixed Blade My Rifle: RRA Lower RRA Stock MI BUIS Stag 16" Upper EOTECH 5.11 CAA Cheap-O Rails SureFire 6P P.I.G Drop Slider MK1 Are you running any secondary mag carriers? -dave I have to find mine. I have a Comp-Tac single I need to modify.
This rig is literally brand new. I'm still waiting on a new holster (Comp-Tac Settable Cant). |
If its "just as good" why compare it?
Joined:
Mar 2008
Posts:
5424
EE: 100% (25)
KY, USA
|
Originally Posted By madradhu:
OSOE MWR-L I just picked up, still working out exactly how i'm gonna have it set up. http://img687.imageshack.us/img687/2168/photocopye.jpg what knife is that? |
|
Originally Posted By cabrito:
Originally Posted By madradhu:
OSOE MWR-L I just picked up, still working out exactly how i'm gonna have it set up. http://img687.imageshack.us/img687/2168/photocopye.jpg what knife is that? Spyderco Swick, now discontinued. Nice little knife, had the sheath made by a guy on bladeforums.com and added the paracord wrap myself. |
|
Originally Posted By solution_zero: http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. Solution_Zero, Far be it for me to ask, but, why the cross draw, and why did you mount the holster so high? Are you not wearing the sidearm on your strong side due to body armor? |
|
Originally Posted By stoner63a:
Solution_Zero, Far be it for me to ask, but, why the cross draw, and why did you mount the holster so high? Are you not wearing the sidearm on your strong side due to body armor? About 5 years ago I tried a drop-leg holster. After wearing it for a day out at the farm, I said "f*ck that." For awhile I ran a 1st line under my MAV, with the Safariland 6280 in a mid-ride configuration. It was comfortable and worked well for drawing the pistol, but the MAV was resting on the 1st line. It would cause the bottom of the pouches on the MAV to push in towards me when I leaned over, kneeled or sat down, which became painful pretty quickly. So, I decided to mount the holster on my MAV, and have all my stuff on one rig. The only way I could do this comfortably was crossdraw. If I mounted it on the strong side (right), it would be impossible to draw. It is very comfortable, and although it appears to ride high I barely notice it. I much prefer it to any other configuration I've tried. I'm not a soldier, and this is a SHTF rig; I plan to be far from the action should it ever happen. I would be wearing this rig while doing all the other daily tasks, and it is in a place where it won't get in the way. Pro's: Comfortable, rides easy in a vehicle, out of the way. Con's: Slower transition draw. 
|
"When Z-day comes, I'm gonna trap and release zeds after putting kevlar helmets on them, just to fuck with you guys." -DDiggler
|
Originally Posted By solution_zero: Originally Posted By stoner63a: Solution_Zero, Far be it for me to ask, but, why the cross draw, and why did you mount the holster so high? Are you not wearing the sidearm on your strong side due to body armor? About 5 years ago I tried a drop-leg holster. After wearing it for a day out at the farm, I said "f*ck that." For awhile I ran a 1st line under my MAV, with the Safariland 6280 in a mid-ride configuration. It was comfortable and worked well for drawing the pistol, but the MAV was resting on the 1st line. It would cause the bottom of the pouches on the MAV to push in towards me when I leaned over, kneeled or sat down, which became painful pretty quickly. So, I decided to mount the holster on my MAV, and have all my stuff on one rig. The only way I could do this comfortably was crossdraw. If I mounted it on the strong side (right), it would be impossible to draw. It is very comfortable, and although it appears to ride high I barely notice it. I much prefer it to any other configuration I've tried. I'm not a soldier, and this is a SHTF rig; I plan to be far from the action should it ever happen. I would be wearing this rig while doing all the other daily tasks, and it is in a place where it won't get in the way. Pro's: Comfortable, rides easy in a vehicle, out of the way. Con's: Slower transition draw. I was finally able to get a Safariland 6304-3832 in FDE for my G21SF Picatinny. How I use it, I wouldn't classify as a drop leg, more of a lowered belt holster, using only the bottom leg strap, lowered just enough to clear my cummerbund. This mode will probably change after I get the side ESAPI plate pouches, either the Eagle CIRAS or HSGI adapter. |
|
That IR panel kicks ass |
If its "just as good" why compare it?
Joined:
Mar 2008
Posts:
5493
EE: 100% (25)
KY, USA
|
Originally Posted By MEANjoeGREEN84:
Who makes that rig in your first two pics Shawnmt6601 ? sorry I didnt see your post its made by specialty defense systems ( SDS) the USGI supplier, its a MOLLE II FLC |
Picking up a Colt 1911 is like shaking hands with an old friend
Thanks to Peepshowal ,CTbuilder1 and Frens !
"only fear and lack of skill drives men to want bigger calibers." -stormwalker
Thanks to Peepshowal ,CTbuilder1 and Frens !
"only fear and lack of skill drives men to want bigger calibers." -stormwalker
|
After my last carbine course at Tiger Valley I decided to make a couple small changes. Added a Fast-Mag for quicker reload and tossed a couple pistol mag pouches on the front of the Fast-Mmag. The great thing about a running modular rig is that I can easily change from this config to a dedicated rifle rig by replacing the pistol mag pouches with a second Fast-Mag if I want to ditch the handgun (which I often do). Below is a breakdown of this kit:
TT 2 piece MAV with back panel from Go-Gear Tactical. TT X-harness, with low-profile drag handle by Go-Gear Tactical SDS Mag pouch used as a radio pouch on the X-harness (sometimes I ditch this) Eagle mag pouches holding 6 AR mags. Fast-Mag holding 1 AR mag ESSTAC pistol mag pouches holding 2 Beretta mags ATS tear-away Med pouch Go-Gear Tactical custom pouch for all my misc tools ect. Go-Gear Tactical Nalgene pouches holding 2 bottles +1 stainless cup 
|
|
Love the IR sticker on your k-pot. |
|
Originally Posted By albatrossarmament:
After my last carbine course at Tiger Valley I decided to make a couple small changes. Added a Fast-Mag for quicker reload and tossed a couple pistol mag pouches on the front of the Fast-Mmag. The great thing about a running modular rig is that I can easily change from this config to a dedicated rifle rig by replacing the pistol mag pouches with a second Fast-Mag if I want to ditch the handgun (which I often do). Below is a breakdown of this kit: TT 2 piece MAV with back panel from Go-Gear Tactical. TT X-harness, with low-profile drag handle by Go-Gear Tactical SDS Mag pouch used as a radio pouch on the X-harness (sometimes I ditch this) Eagle mag pouches holding 6 AR mags. Fast-Mag holding 1 AR mag ESSTAC pistol mag pouches holding 2 Beretta mags ATS tear-away Med pouch Go-Gear Tactical custom pouch for all my misc tools ect. Go-Gear Tactical Nalgene pouches holding 2 bottles +1 stainless cup http://i58.photobucket.com/albums/g261/waffenmacht/PP1-1.jpg http://i58.photobucket.com/albums/g261/waffenmacht/PP2-1.jpg http://i58.photobucket.com/albums/g261/waffenmacht/PP3.jpg impressively solid setup. Hope to see you at the Bug out Drill this year and one of the Tac Team Matches too....
|
Being a contributing member means you contribute – to a TECH FORUM...
"If another mod is needed the current mod will let us know." TBK1
"If another mod is needed the current mod will let us know." TBK1
|
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? |
|
Originally Posted By mdwicks:
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? Probably the same way people draw from a thigh or drop hip rig, creativly. |
"...all enemies, foreign and domestic."
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
|
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? Probably the same way people draw from a thigh or drop hip rig, creativly. If your holster is so low that you can't just reach around your back with the opposite hand and draw smoothly without having to bend at the knees or waist then you're doing it wrong, drop leg rig or not. This guy's cross draw looks impossible to use with only the left hand. And the "cross that bridge when I come to it" attitude is not a good one to have when it comes to holsters. |
|
Originally Posted By mdwicks:
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? Probably the same way people draw from a thigh or drop hip rig, creativly. If your holster is so low that you can't just reach around your back with the opposite hand and draw smoothly without having to bend at the knees or waist then you're doing it wrong, drop leg rig or not. This guy's cross draw looks impossible to use with only the left hand. And the "cross that bridge when I come to it" attitude is not a good one to have when it comes to holsters. I concur. I'm not saying I'd do it that way. That's too much on one rig for me. IMO pistol (and mags) is a belt mounted weapon and rifle (and it's mags) is a torso mounted one. But not everything he wants is possible without putting it there, so it's gonna get creative. Hopefully he wont be shot in the right arm. |
"...all enemies, foreign and domestic."
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
|
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? Probably the same way people draw from a thigh or drop hip rig, creativly. If your holster is so low that you can't just reach around your back with the opposite hand and draw smoothly without having to bend at the knees or waist then you're doing it wrong, drop leg rig or not. This guy's cross draw looks impossible to use with only the left hand. And the "cross that bridge when I come to it" attitude is not a good one to have when it comes to holsters. I concur. I'm not saying I'd do it that way. That's too much on one rig for me. IMO pistol (and mags) is a belt mounted weapon and rifle (and it's mags) is a torso mounted one. But not everything he wants is possible without putting it there, so it's gonna get creative. Hopefully he wont be shot in the right arm. It's not impossible to draw with the left hand. I've practiced it several times, and it works fairly smoothly. Push the release down and forward with the left thumb, put the elbow out, grab pistol with left hand, and pull straight up. Not hard at all. It's actually a lot easier than reaching behind your back to get to a right side mounted drop-leg.
I clearly explained why I'm no longer running a 1st line under the 2nd line in the post. It is designed to have everything on one rig, which is a hell of a lot easier on a man doing a lot of hiking, IMHO. Food and water on the rig are going to be more important to me in my AO. |
"When Z-day comes, I'm gonna trap and release zeds after putting kevlar helmets on them, just to fuck with you guys." -DDiggler
|
Originally Posted By solution_zero:
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By 6Demon6Face6:
Originally Posted By mdwicks:
Originally Posted By solution_zero:
http://i15.photobucket.com/albums/a395/solution_zero/MAV11JAN2010.jpg http://i15.photobucket.com/albums/a395/solution_zero/MAVSides11JAN2010.jpg After running a drop leg, then a 1st line under the MAV, I decided I liked it better all on 1 rig. How do you draw your pistol if your right hand becomes incapacitated? Probably the same way people draw from a thigh or drop hip rig, creativly. If your holster is so low that you can't just reach around your back with the opposite hand and draw smoothly without having to bend at the knees or waist then you're doing it wrong, drop leg rig or not. This guy's cross draw looks impossible to use with only the left hand. And the "cross that bridge when I come to it" attitude is not a good one to have when it comes to holsters. I concur. I'm not saying I'd do it that way. That's too much on one rig for me. IMO pistol (and mags) is a belt mounted weapon and rifle (and it's mags) is a torso mounted one. But not everything he wants is possible without putting it there, so it's gonna get creative. Hopefully he wont be shot in the right arm. It's not impossible to draw with the left hand. I've practiced it several times, and it works fairly smoothly. Push the release down and forward with the left thumb, put the elbow out, grab pistol with left hand, and pull straight up. Not hard at all. It's actually a lot easier than reaching behind your back to get to a right side mounted drop-leg.
I clearly explained why I'm no longer running a 1st line under the 2nd line in the post. It is designed to have everything on one rig, which is a hell of a lot easier on a man doing a lot of hiking, IMHO. Food and water on the rig are going to be more important to me in my AO. Pow! told you it'd be creative. |
"...all enemies, foreign and domestic."
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
Proud owner and supporter of Magpul, Spike's Tactical, Oakley, Surefire, and SKD products.
GT- Ripper888
Post your gear porn here!!!!! Part two. (Page 3 of 166)
Armory Sponsor