Armory Sponsor
Posted: 4/30/2008 9:24:35 AM EDT
|
I've used both LED & incandescent taclights during nightshoots and while I don't recall seeing any reflection from fired gasses I did see a lot of reflection from kicked up dust w/both types of lights. I use the 80 lumen TLR-1 myself, might have gone w/the SSL-1 if they'd made a remote tapeswitch for it. Tomac |
Get this one, and a mount from the same website, thank me later  Cree P4 I have surefires, and this is really just as good. |
|
Thanks guys. Yea, a switch would be nice but it will do as it is. That websight has a cheap BSA reflex scope I might buy for my airsoft gun, real good prices. I bought the ssl-1 for real cheap tho so I will stick with it. Botach, check it out. http://www.botachtactical.com/insstali.html |
Hey KLYPH, I bought the largest Ergogrip rail for the Rem 870 and wish I had a lil bit more hand room. If you install a VFG only then it really wont matter much to you. The rails are like $50 and mine needed to be fitted. When I installed it the rails on the sides were too long when rack the action bars back the rails were hitting the sides of the receiver. They are aluminum rails, and I was able to quickly fix the problem by cutting the sides off a slight bit with a Dremel tool. I used an Insight M3 light that i had left over thats been sitting in my safe. It's simple and cheap and it works. |
Armory Sponsor