Posted: 10/16/2010 9:16:25 PM EDT
|
Ok I just received my Ultimate Cliploader from CTD today. I tried it out and it failed miserably. Appeared to be manufacturing debris inside the device. I cleaned it out best I could without disassembling the thing. Still didn't work. If I shake the crap out of it I can get a few rounds into it and if I fiddle with it for 2 or 3 minutes I can shake and rattle it around enough to get maybe 7 or 8 rounds in but this is nowhere close to a 3 second reload. Was using Federal Bulk Pack 550 count ammo. My thinking is speedloading means I am gonna be shooting large volumes hence using cheap bulk ammo. I am using this for loading Mark III mags.
Anyone else have one of this things and if so what are your own impressions with it? Problems? Solutions? Thanks, Wes |
|
Quoted:
Did you adjust the screw on the end of the loader? I had to tweak mine to get it to go - now it runs like a top. yes I adjusted it all sorts of ways and I bought 40 bucks worth of different ammo from wal-mart to see if it is an ammo problem Rem 550 bulk... if I pump the mag I can get it to work about 80% Win 330 bulk... bout the same CCI mini mag 36 gn 100 count if I pump the mag I can get it to work... Federal 550 bull pack pump the mag I may be able to get 7 or 8 to feed in 3 minutes or I get pissed off whatever comes first ...at any rate I get nothing anywhere close to a 3 second load. Ruger Mark 3 mags... I am still on the fence about returning it cause I know I will be footing the bill for shipping on it (again) and by the time all is said and done I will have enough shipping fees to have purchased 2 units... |