Posted: 3/19/2003 9:13:41 AM EDT
| I just picked up a p13-45 new with tree new 13 rd magazines 2 of them work fine the third seems to have a heavier spring in it I had to realy force the 13th round into it then when firing the bullets got stuck halfway in the magazine the spring wouldnt push them up I had to slam it in the palm of my hand to get it unjammed . Does anyone know why this is happening with just the 1 mag ? |
|
Check the spring length against the other two, you may have a P14 spring in there. If so, just shorten to equalize. Also, clean out the mag well and look inside to make sure there are no minor dents on which the follower can hang. These can be pushed out with a wedge of wood if not severe. Make sure on reassembly that the front end of the spring fits up under the nose of the follower to hold it up well.Good luck! |