Posted: 10/29/2004 10:23:43 AM EDT
Borrowed from my other thread:
Is there a link to the info or would someone explain in simple terms how the "striker-fired" system operates? Is Glock the only mfg using this firing system? |
|
Striker fired means that the firing pin (striker) is spring loaded and when pulled rearward and released hits the primer vs. hammer fired where the firing pin is struck my a hammer to hit the primer. glockmeister.com/safeties.shtml |
|
OK, I think I get it. So the pressure on the trigger pull is from loading the spring, not cocking or releasing a hammer that doesn't exist. That's why the pull is the same every time since there is no hammer movement. Am I following correctly? Is this the same type of striker system that S.A. is calling their USA system? Or is Glock superior/different than that one? |
The trigger pull weight is from the striker (firing pin spring), trigger spring and disconnector type in the Glock. The trigger pull can be lightened or made heavier by changing any or all of these parts. A Glocks firing pin spring is pulled rearward very slightly (about 20%) when a round is chambered and it's 'cocked' ready to fire. The biggest difference the Glock has to the SA is that the SA has a grip safety thats not really needed but makes some people feel safer I guess. |
Glock trigger has to pull the firing pin back most of the way before releasing it (80% of the way I think). Springfield Armory's XD already has the firing pin pulled back. The trigger pull merely releases the firing pin. Both use the same system. Springfield has 1 additional safety and the only difference is the position of the firing pin before pulling the trigger. |
So if the XD's firing pin happens to be accidentally released somehow, the gun will fire, whereas a Glock won't? |
I think it can't fire if dropped because of the firing pin safety, just like on a Glock, Beretta or SIG. The trigger has to be pulled to release it. |
It is in theory easier for the (single action) HS2000 to have a mechanical failure discharge because the striker is cocked when loaded. The Glock is double action and the firing pin is only under enough force to fire when the trigger is pulled. The HS200 grip safety only blocks the sear. There is a striker block incorporated into the trigger. Also there is a Glock type safety in the trigger. For the HS2000 to fire from mechanical failure the striker safety and the sear would both have to fail. Because it is not cocked (and also has a striker safety) the only way a Glock should fire from mechanical failure is for a police officer to be giving a demonstration on gun safety to a classroom full of children. |
 +1 |