[ARCHIVED THREAD] - CZ75 Factory Recoil Spring Weight ?

Posted: 3/24/2015 7:53:14 PM EDT

What weight recoil spring does the factory put in the full size CZ75 SP-01 ?
TIA.

Posted: 3/24/2015 8:37:09 PM EDT

[#1]

The flat wire SP01 spring is rumored to be 18 lbs and the 75B factory spring 16/17 lbs.

Any of them in that range should work fine with normal pressure ammo.

You will notice CZC doesn't list a weight:

http://czcustom.com/CZ_75_SP01-Original-Factory-Recoil-Spring.aspx

Posted: 3/25/2015 11:32:27 AM EDT

[#2]

The 75B factory recoil spring is 14lbs. I would expect the SP-01 to be the same, however from the above post they may have upped it a bit.

Posted: 3/25/2015 9:01:59 PM EDT

[#3]

Quote History

Quoted:

The 75B factory recoil spring is 14lbs. I would expect the SP-01 to be the same, however from the above post they may have upped it a bit.

View Quote

That's what I thought too. 14lbs for the 75B, 16lbs for compacts. Not sure if they have a different spring rate for .40s&w or not.

Posted: 3/25/2015 9:07:12 PM EDT

[#4]

I think at one time they were using 12lb springs from the factory. I usually toss the factory spring at the initial cleaning and put one of my own in now.

My Single Action was really weakly sprung so it may vary quite a bit in what you get from CZ.

[ARCHIVED THREAD] - CZ75 Factory Recoil Spring Weight ?

Warning

Confirm Action

[ARCHIVED THREAD] - CZ75 Factory Recoil Spring Weight ?

[ARCHIVED THREAD] - CZ75 Factory Recoil Spring Weight ?