Posted: 10/20/2006 2:08:53 PM EDT
|
>Dress the ejector face. You want to scale back three of the four corners on the face so that it ejects sharply to the side, instead of back into your face. Diagram: p22e.gif (below) The quote above is from the "How I made my P22 not suck" thread. Problem is, when I look at the p22e.gif diagram, the three corners I would have filed off are not the three corners pictured. If the diagram is right, what makes it work? Me, I would have filed all but the lower left corner (as seen from behind the gun.) In other words, just the opposite of what is shown in the diagram. Has anyone done this mod? Is the following diagram correct? My wife would rather not catch hot casings in her brassiere. Thanks! Tom http://members.aol.com/snick24392/p22e.gif |
|
I don't own a P22 (yet) but if you want it to eject more to the side, either lift/bend the ejector upward and/or file on the face of the ejector to keep it flush (flat), with the breach face. Although, looking at that diagram, is the ejector really that squared? (blocky) If it is, then yes, follow what it says and it should work. |