Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/13/2006 7:16:45 PM EDT
I'm sure that this has been addressed, but I want to lighten the pull on my DA for my 92FS and wonder how this is done and the best way/parts to do it. Thanks!
Link Posted: 1/13/2006 11:22:15 PM EDT
Ciao Rizzo,
you should begin polishing like a mirror here:
http://img64.imageshack.us/img64/4332/triggerk7kx.jpg
and here
http://img64.imageshack.us/img64/9260/triggerj9ql.jpg
Have fun!

Paolo
Link Posted: 1/14/2006 12:56:43 AM EDT
I put a lighter hammer spring in mine and it helped a bit. However I put an extra power recoil spring in at the same time.
Link Posted: 1/14/2006 1:10:15 AM EDT
Replace the stock hammer spring with a "D" model hammer spring. It makes the DA pull MUCH nicer, and is a 5 min job you can do on the kitchen table.
Link Posted: 1/14/2006 3:25:38 PM EDT
Personally, while I am a fair shade tree mechanic, I would NEVER attempt to "fix" a sear/hammer on one of my guns. This is why they have professional gunsmiths with liability insurance, IMO.

My .o2
Link Posted: 1/17/2006 4:23:15 PM EDT
Thanks for the info guys - I think I'll go with just changing the hammer and maybe the spring. Hopefully that works! Any suggestions on where to buy the parts?
Link Posted: 1/17/2006 4:26:33 PM EDT

Originally Posted By rizzo1318:
Thanks for the info guys - I think I'll go with just changing the hammer and maybe the spring. Hopefully that works! Any suggestions on where to buy the parts?



Changing the hammer will have a negligible effect on trigger pull. People put in the skeletonized hammer mostly for it to look cool. Changing the hammer SPRING will be what changes your trigger pull. You can order both from beretta directly.

The hammer is an EliteII hammer, and the spring is the D model spring.
Link Posted: 1/21/2006 9:26:56 AM EDT
It's called single action.
Link Posted: 1/21/2006 11:22:53 AM EDT

Originally Posted By rizzo1318:
Thanks for the info guys - I think I'll go with just changing the hammer and maybe the spring. Hopefully that works! Any suggestions on where to buy the parts?



Changing the hammer without polishing the "L" groove won't make big difference I guess.
For the hammer spring try at www.gunsprings.com, they sell and inexpensive reduced power springs kit.

Ciao
Link Posted: 1/22/2006 9:03:39 AM EDT
This is probably more clear. Not difficul and very much rewarding.

http://img299.imageshack.us/img299/4827/t23rx.th.jpg

http://img299.imageshack.us/img299/5404/t11rz.th.jpg

Have fun.
Link Posted: 1/23/2006 8:37:02 AM EDT
+1 Paulo! I did my sear to a MIRROR FINISH with 600 then 800 grit sandpaper and finished with a felt dremel, and it makes the trigger smooth as glass!
Link Posted: 1/23/2006 8:51:08 AM EDT
AWESOME!!!

Top Top