[ARCHIVED THREAD] - Which Light?

Posted: 9/7/2015 11:07:31 PM EDT

Is there a light out there that fits the SIG P series rail? Besides the one made by SIG? I was thinking of getting a TR-1 but read using it on the SIGs could cause damage to the finish of the gun and the light.

So which light are people using?

Thanks

Posted: 9/8/2015 12:33:35 AM EDT

[#1]

I use TLR-1 on mine.

Posted: 9/8/2015 10:31:34 AM EDT

[#2]

Surefire x400 on Sig 1911 Tacops Carry
Had to sand down the plastic spacer on the Surefire in order to align it properly.

Posted: 9/8/2015 12:49:46 PM EDT

[#3]

No problems with a tlr-1 hl on my 226.

If you're concerned put a small piece of electrical tape on the rail.

Posted: 9/8/2015 11:41:28 PM EDT

[#4]

Depends which SIG you have. Some have SIG-style rails, and some have mil-spec rails..

Posted: 9/9/2015 6:18:00 PM EDT

[#5]

I use a TLR-2 on a P229 and P320 with no issues.

Posted: 9/9/2015 8:25:34 PM EDT

[#6]

TLR-1 HL on my p226 .40 tacops. No issues, no problems, and it is a work gun.

Posted: 9/10/2015 9:43:11 PM EDT

[#7]

Thanks all.

If this was a work gun I would not care about messing up the finishes but being I will be using this on my own guns, screwing up the finish is a concern. Sounds like no problems with the TRL-1.

Posted: 9/17/2015 3:36:20 PM EDT

[#8]

Quote History

Quoted:
Thanks all.

If this was a work gun I would not care about messing up the finishes but being I will be using this on my own guns, screwing up the finish is a concern. Sounds like no problems with the TRL-1.

View Quote

The TRL-1 will very likely rub off the finish in spots if you fire the gun with it on, as will any direct metal on metal application, sooner or later. I know from experience. I've used a cut bike innner tube as a spacer on BBQ guns.

[ARCHIVED THREAD] - Which Light?

Warning

Confirm Action

[ARCHIVED THREAD] - Which Light?

[ARCHIVED THREAD] - Which Light?