Posted: 12/17/2013 4:21:17 PM EDT
I have taken a few sigs apart (220, 226, 228 and 229). I am not an expert but have not had any problems.
I got this 229 DAO that I took completely apart. Not paying attention when taking the Sear pin out (All the usual parts fall out and I start cleaning). As I was putting the loose parts in a container I noticed a spring and an extra piece I wasn't familiar with. I went on cleaning and stared putting it back together and figured out where the extra piece went except the spring. The gun functions but I have this spring here that I cant figure out what its for! I don't have a manual and every video with a p229 has a regular frame! This is it. Let me know what I need to do. 
This is a DAO and I have been thinking about converting it to a DA/SA. I saw that all I need is a (Hammer, Decocker lever, spring and bearing). When I took off the grips to disassemble I noticed the decocker spring and bearing already there. Does that mean all I need is a Hammer and Lever? 
Thanks Eddie |
|
It looks like you have a frame with a magazine disconnect. Rather than reposting everything here, check out these links where it has been described before. Good luck!
http://sigtalk.com/sig-sauer-pistols/15061-sig-sauer-p229-dao-unable-identify-part.html http://thecurmudgeon.freeservers.com/sig_mag_safety.html http://www.gunknowledge.com/Documents/Sig%20Sauer/Sig%20P220%20P225%20P226%20P228%20P229%20P239%20P245%20Owners%20Manual.pdf Converting to da/sa, you'll need different grips also. |