Posted: 12/7/2008 6:45:11 PM EDT
| Are glock frames interchangeable? I have a glock 17 and found a glock 24 complete slide for sale. Any problems with mounting it on the 17 frame? |
|
Quoted:
my frame is. i'm not sure on the slide yet. i sent a message to the seller but they havn't replied yet. Any idea on what a used complete slide is worth? then it will work Fine I gave some in $600 range for my 24. They only glocks that can't handed the 40 is the old 80 and early 90s |
|
Quoted:
http://glockmeister.com/product_info.php?cPath=10&products_id=248
3rd pin? what is this pin you speak of 
|
|
Quoted:
Quoted:
http://glockmeister.com/product_info.php?cPath=10&products_id=248
3rd pin? what is this pin you speak of http://glockmeister.com/catalog/images/LockingBlock.jpg where i can find this part in the glock ? (if you have pics more betters) |
|
Quoted:
Quoted:
url=http://glockmeister.com/product_info.php?cPath=10&products_id=248]http://glockmeister.com/product_info.php?cPath=10&products_id=248[/url] http://glockmeister.com/catalog/images/LockingBlock.jpg where i can find this part in the glock ? (if you have pics more betters) sorry, I don't have any pics but, that is the locking block. If you pull off the slide, it is the U shaped metal hunk right behind the front slide rails in the frame. |
|
All Glocks, no matter what generation or caliber have pins 1&2:
1)Trigger Mechanism Housing pin 2)Trigger Pin All Glocks regardless of the generation, other then the 9mm fullsize and compact, up to '02 have pin #3 3)Locking Block Pin All Glocks after '02 regardless of size or caliber have all 3 pins 
ETA: If your G17 has all 3 pins, yes you can use the G24 upper on your receiver. You just need to change the ejector. 
|
|
Quoted:
ok , if i want to reemplace the barrel of a glock 23 to a barrel of a model 19 i'm be sure with the 23 and 19 have the tree pins i cannot put a barrel of a glock 19 2 pins to a model 23 3 pins ? DON'T use a G19 barrel in ANY G23 If you want to shoot 9mm out of your G23 you will need a conversion barrel The 9mm and .40 barrels have a different outside diameter. |
|
Glock 24 upper went on to the G 17 frame without a hitch. Didn't change anything in the frame, just used .40 mags and so far it hasn't had any jams.
the 40 cal ammo had enough recoil to knock off the mag well. I had been running light 9mm reloads and it stayed on just fine. |