Posted: 11/19/2016 11:21:04 PM EDT
|
Has anyone tried a Kineti-Tech glock trigger? Looks like they have 4 styles.
Currently have a Ghost smooth trigger and looking for something with more finger contact on a G23. |
| I have one in my 43 and like it alright. I very much like the simple design. The only downside (in mine in particular) is the spring within the safety seems to be off-kilter or something, because it makes that awful crunchy, spring sound when depressed. You can feel it all the way through the trigger too. |
|
Quoted:
I have one in my 43 and like it alright. I very much like the simple design. The only downside (in mine in particular) is the spring within the safety seems to be off-kilter or something, because it makes that awful crunchy, spring sound when depressed. You can feel it all the way through the trigger too. I have the same experience. The spring is rubbing the anodizing or something and it makes a creaky sound. I do like the trigger itself though. I have 3 of the straight and flat types. Overall a satisfied thumbs up. |
|
I've installed 4 of them so far. If you are going to use your oem trigger bar check to see if the roll pin on the trigger shoe doesn't bind against it. A small burring stone can open up the trigger bar pin hole slightly so it doesn't bind. You also need to drill the factory trigger shoe to be able to push the blind pin out if you are intent on using your oem trigger bar. Otherwise order the shoe you want with the correct trigger bar for your model pistol and save yourself the hassle.
Regarding their cs, the last two triggers I ordered were for G40 pistols and the triggers they shipped came with the wrong trigger bars. They told me they didn't have those trigger bars but instead of notifying me up front they shipped the wrong bars out so I found out the hard way when the trigger wouldn't reset and I had to gut the slide in order to field strip the pistol again. In their defense though, they provided a shipping label to return the parts and refunded my purchase. I ended up using the oem gen 4 bars with their shoes but had to do a little fitting because their roll pins are a little oversized as mentioned above. As far as the triggers feel and perform, very short reset and no overtravel. I'm satisfied for the money spent. |
|
Just installed the #3 trigger in my son's G23 Gen 3 using the OEM trigger bar and disconnect. It has a longer pull than I was expecting. but it was fairly smooth. No spring crunch sounds on this one.
Had to open up the hole in the trigger bar a little to accept the roll pin. Might get one for my G23 as well. |