Posted: 10/6/2016 5:43:23 PM EDT
|
So I am in the process of converting my 23 to a 19. I bought a nice 19 upper off of the EE and a Gen3 ejector and housing from Midway. The housing came with the 336 extractor. I did this same conversation on my 22 over the winter and used a 336 ejector with zero issues, however I've been reading up on here that the late Gen3 can have issues with the 336 ejector on the 19.
Should I replace it with a 30274 just as insurance? |
|
Quoted:
Thanks guys. I'll give it a shot. The extractor in the Gen3 is the real issue right? What is a good replacement for it? Apex ? It's difficult to say. Some people replaced the extractor, and the BTF went away. Others replaced it with no change or worse results. Same with the ejector, or a combination of both. I replaced a an OEM extractor in a Gen 4 19 that really wasn't having any problems with a Lone Wolf extractor, and man, did that make it shit the bed. Just a lot of variables to account for. |
|
Quoted:
Thanks guys. I'll give it a shot. The extractor in the Gen3 is the real issue right? What is a good replacement for it? Apex ? Generally it's the extractor, and generally the Apex replacement fixes it. Some lucky Glocks just don't have the problem to begin with. |