Posted: 8/19/2016 7:53:16 AM EDT
|
Did I miss the memo?.....Glock quit importing their barrels? Gemtech had good stock for awhile and now it's not even on their website.
I got all my pre41P on the way and got all metric pistons. Looking for 21 and 19 barrels. And yes I know I have aftermarket options just trying to avoid as I got all metric at this point. |
I did just the opposite. I was going to go OEM Glock too but I didn't want to get tied to that Glock specific metric thread or have to have multiple pistons so I decided to stick with 1/2x28 and got a Silencerco barrel... not that any of that helps you. 
I do see Glock OEM threaded barrels pop up on the EE fairly frequently so I would check that out often because they do tend to go quick. |
|
Quoted: I did just the opposite. I was going to go OEM Glock too but I didn't want to get tied to that Glock specific metric thread or have to have multiple pistons so I decided to stick with 1/2x28 and got a Silencerco barrel... not that any of that helps you. BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. |
|
Quoted: BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html |
|
Quoted: Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html Quoted: Quoted: BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html |
|
Quoted: Thanks. It's an OCD thing. I want the OEM factory thread protectors. Quoted: Quoted: Quoted: BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html My OEM barrel (purchased from here) came with a plastic thread protector and from what I've read the factory pistols with threaded barrels come with the same. Have you seen an OEM metal thread protector? |
|
Quoted: My OEM barrel (purchased from here) came with a plastic thread protector and from what I've read the factory pistols with threaded barrels come with the same. Have you seen an OEM metal thread protector? |
|
Quoted:
Thanks. It's an OCD thing. I want the OEM factory thread protectors. Quoted:
Quoted:
Quoted:
BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html The thread protector on mine was plastic junk. |
|
Quoted:
So with the barrels not being imported then, what about the glock tb guns? What about them? I always read if you don't want left handed threads, Glock parts is not the way.....aftermarket' LW, ZEV etc. I bought a Bar-Sto "ported" SS 9mm barrel. The is no difference I can tell. But, I am NO expert either. Only top-level shooters would know the difference. I have a loong way to go to gain that level of performance. Through self evaluation, trainor's evaluations and being honest with yourself, does this understanding come to forefront. But, if you want the threaded barrel for for hunting or other applications.....go for it. Just remember the threads are opposite from the regular stock Glock parts. |
|
Quoted: So with the barrels not being imported then, what about the glock tb guns? |
|
Quoted:
My OEM barrel (purchased from here) came with a plastic thread protector and from what I've read the factory pistols with threaded barrels come with the same. Have you seen an OEM metal thread protector? Quoted:
Quoted:
Quoted:
Quoted:
BTW - If anyone comes across the factory OEM thread protectors, I need a few. Happy to pay for them. Grabagun.com has the best deal I found on a YHM thread protector for the OEM barrels. http://grabagun.com/yankee-hill-machine-company-9mm-thr-prot-m13-5x1lh-625-od.html My OEM barrel (purchased from here) came with a plastic thread protector and from what I've read the factory pistols with threaded barrels come with the same. Have you seen an OEM metal thread protector? If you read their page, they don't sell to lowly civilians. Only LEO or other public service type professionals. |
|
Quoted: Look in EE. I see them listed periodically. That's were I bought my factory 19 threaded barrel from. $125 for a G19 OEM threaded barrel with 25 rounds through it. |