|
Originally Posted By TheTacticalCoyote: KKM Comp and barrel. Originally Posted By TheTacticalCoyote: Originally Posted By 96Ag: Originally Posted By Lancelot: Originally Posted By TheTacticalCoyote: https://farm2.staticflickr.com/1641/26336888015_49636ec138_b.jpgRolando Especial by Two Sierra, on Flickr Which magwell / trigger is that? And which compensator? Thank you. KKM Comp and barrel. Thank you. |
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
 Roland Special. by Two Sierra, on Flickr
|
Originally Posted By bradpierson26:
So I know you're a SF whore . . . . .
So I know you're a SF whore . . . . .
|
When I saw this, my first thought was "That thing is fuck-ugly and there is no way anyone would use that outside of competition."
Read the G&A article, took a closer look. The concept is sound; same size as a Glock 34 with a brake slapped on to reduce muzzle flip. But some of the details are stupid as hell. I can't see anyone managing to rack the slide on something other than, say, their clothing with top slide serrations. Could certainly do so off of the RMR, but I'd be worried about breaking it off the slide. Minor concern in a life/death situation, but something to think about. Anyway. This would be an optimal setup for someone whose only weapon is their sidearm, say law enforcement.(Don't see any department allowing it, unless they're SWAT) My only concern would be trigger/action work, and the KKM barrel; that seems to be where reliability problems could be introduced, and I'm not a fan of trigger work on guns that I carry. I don't see much need for a match-grade barrel, either; the stock ones hold 2-3 inches for me at 25 yards. Has anyone attached a muzzle brake to a factory threaded barrel? That would seem to be the optimal setup, at least for me. |
| Aftee reading about this new concept I decided to built one to use it as a range toy, but let me tell you I'm so impress about how flat it shoots, acquiring the rmr dot it's so easy, it quickly became one of my favorite so decided to carry and order an IWB JM custom that it will take some time to get to me, any of you guys carrying this bad boy I'm open to other suggestions on holsters |
Every man is a warrior inside...but the choice to fight is his own
|
Originally Posted By khadafy:
Aftee reading about this new concept I decided to built one to use it as a range toy, but let me tell you I'm so impress about how flat it shoots, acquiring the rmr dot it's so easy, it quickly became one of my favorite so decided to carry and order an IWB JM custom that it will take some time to get to me, any of you guys carrying this bad boy I'm open to other suggestions on holsters The JM Custom Kydex rig is what I'm running as well. I know others have taken a liking to the VG3 from RCS, but I had my JM before the VG3 was released to the public, so I've been sticking with it. |
|
Originally Posted By Ghent915:
The JM Custom Kydex rig is what I'm running as well. I know others have taken a liking to the VG3 from RCS, but I had my JM before the VG3 was released to the public, so I've been sticking with it. Originally Posted By Ghent915:
Originally Posted By khadafy:
Aftee reading about this new concept I decided to built one to use it as a range toy, but let me tell you I'm so impress about how flat it shoots, acquiring the rmr dot it's so easy, it quickly became one of my favorite so decided to carry and order an IWB JM custom that it will take some time to get to me, any of you guys carrying this bad boy I'm open to other suggestions on holsters The JM Custom Kydex rig is what I'm running as well. I know others have taken a liking to the VG3 from RCS, but I had my JM before the VG3 was released to the public, so I've been sticking with it. I will like to try the VG3 concept, but i the same time i need a holster that will allow me to do live fire. I was looking at the EIDOLON but don't know if it fits. |
Every man is a warrior inside...but the choice to fight is his own
|
Originally Posted By steve-oh:
roland speshul in the wild? My eyes aren't that good. http://img.photobucket.com/albums/v231/sr338/50CA9840-54AE-45A7-A2E8-C7DC581AC3A0_zpsrbwdwnrb.jpg Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. |
Please, call me Joe
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
|
Originally Posted By TCBA_Joe:
Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. Originally Posted By TCBA_Joe:
Originally Posted By steve-oh:
roland speshul in the wild? My eyes aren't that good. http://img.photobucket.com/albums/v231/sr338/50CA9840-54AE-45A7-A2E8-C7DC581AC3A0_zpsrbwdwnrb.jpg Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. Looks like DARC |
www.facebook.com/thebreve
|
Originally Posted By BCV:
Looks like DARC Originally Posted By BCV:
Originally Posted By TCBA_Joe:
Originally Posted By steve-oh:
roland speshul in the wild? My eyes aren't that good. http://img.photobucket.com/albums/v231/sr338/50CA9840-54AE-45A7-A2E8-C7DC581AC3A0_zpsrbwdwnrb.jpg Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. Looks like DARC Probably, lots of stuff pops up there. Which means that without knowing who is shooting it, it probably isn't "in the wild". |
Please, call me Joe
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
|
Originally Posted By BCV:
Looks like DARC Originally Posted By BCV:
Originally Posted By TCBA_Joe:
Originally Posted By steve-oh:
roland speshul in the wild? My eyes aren't that good. http://img.photobucket.com/albums/v231/sr338/50CA9840-54AE-45A7-A2E8-C7DC581AC3A0_zpsrbwdwnrb.jpg Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. Looks like DARC Not DARC. walls are painted, not coated in explosive residue and sim splatter. |
Referring to me: you have a very sarcastic and condescending and patronizing and insulting and demeaning way of 'being helpful"
Just the right amount of wrong.
Just the right amount of wrong.
|
Originally Posted By TCBA_Joe:
https://pistol-forum.com/attachment.php?attachmentid=6765&d=1459061099 Originally Posted By TCBA_Joe:
Originally Posted By TCBA_Joe:
Originally Posted By UrbancommandoX:
I assume this thread is about the 960 roland conversion? I read on the 460 how the case the thicker and it added some real power to the 45. What advantages does the 960 have or rather what more powerful catridge does it mimic? I heard when this first came out people said it wont do anything 357 sig doesnt do, but there has to be more to this cartridge than that? Not Rowland... Roland. It's a G19 with a RDS, light, and KKM barrel and comp used by some super legit gunfighter types. https://pistol-forum.com/attachment.php?attachmentid=6765&d=1459061099 Rowland...Roland ok now I'm up to speed, I confused myself "sometimes that don't take much" |
Aiming for Alpha's
|
Originally Posted By TheTacticalCoyote:
<a href="https://flic.kr/p/H6UdJW" target="_blank">https://c3.staticflickr.com/8/7349/26977398650_c698f2ff87_b.jpg</a>Roland Special. by Two Sierra, on Flickr image not appropriate for a tech forum -AJE |
|
Originally Posted By BCV: Everytime I see this Glock and I can't help but think how stupid it is, but how much I want one.  I'm in the same boat. Probably pick up the barrel and comp in a month or so, and either an mos or a atom slide. ETA: I'm actually trying to decide between a Roland special, or a G17 with a 6-Sec mount and RDS. Haven't decided which. |
|
Compensated Glock goodness -
Roland Special G19 and Jagerwerks G17C.  2016-07-22_12-25-48 by The One and Only "B"!, on Flickr
 IMG_20160615_123918 by The One and Only "B"!, on Flickr
|
|
Didn't know there was a thread for this.
KE Arms Roland Special Pistol complete. Needs a Talon grip and I may switch to a magwell. Going to swap out to a lighter recoil spring that is more compatible with my reloads. Will be visiting We Plead the 2nd for a holster. 
With enormous KE magwell. 
|
|
Originally Posted By Airborne_Infantryman:
It won't. The KKM comp uses a proprietary thread pitch. Originally Posted By Airborne_Infantryman:
Originally Posted By david0731:
Would that comp fit another barrel, like a s3f solutions threaded barrel? It won't. The KKM comp uses a proprietary thread pitch. Ok, thanks for the reply. |
|
Originally Posted By david0731:
Ok, thanks for the reply. Originally Posted By david0731:
Originally Posted By Airborne_Infantryman:
Originally Posted By david0731:
Would that comp fit another barrel, like a s3f solutions threaded barrel? It won't. The KKM comp uses a proprietary thread pitch. Ok, thanks for the reply. Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. |
|
Originally Posted By Stantonizm:
Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. Originally Posted By Stantonizm:
Originally Posted By david0731:
Originally Posted By Airborne_Infantryman:
Originally Posted By david0731:
Would that comp fit another barrel, like a s3f solutions threaded barrel? It won't. The KKM comp uses a proprietary thread pitch. Ok, thanks for the reply. Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. They do, but it requires red loctite to keep it indexed properly. 
|
|
Originally Posted By Middlelength:
I love how everyone has a hard on for this. This is exactly how I would expect a gun to be set up by people that are familiar with the concept of competition shooting, and yet have no deep mastery of the handgun platform. The comp is lunacy on a 9mm gun, even the NATO stuff doesn't generate enough gas to need any sort of comp. Instead you have introduced ports and venting, and all the associated negative effects, for a pistol that is presumably used in tight quarters by "face shooters". Then, you've made the intentional choice to run a 19, instead of a 17, despite the fact that anyone with more than 5 minutes on a handgun shoots a 17 better, often 15-20% better. You've added a magwell, which is borderline retarded on a concealment piece, so you're just adding further mechanical complexity. Magwells on 19s don't often do that well with large/gloved hands either. Now, we've also added stippling. There are very, very few people who can stipple Glocks without reducing the integrity of the frame/grip. Not a good idea usually on a working gun. And of course, we declare that this is a "special" pistol, for "special" people, as if the concept and application can't then be critiqued. So basically this 
|
Negative, I am a meat popsicle.
|
Originally Posted By fatcat4620:
So basically this http://www.bestcarinf.com/manufacturers/honda/honda-civic/honda-civic-ricer/honda-civic-ricer-4.jpg Originally Posted By fatcat4620:
Originally Posted By Middlelength:
I love how everyone has a hard on for this. This is exactly how I would expect a gun to be set up by people that are familiar with the concept of competition shooting, and yet have no deep mastery of the handgun platform. The comp is lunacy on a 9mm gun, even the NATO stuff doesn't generate enough gas to need any sort of comp. Instead you have introduced ports and venting, and all the associated negative effects, for a pistol that is presumably used in tight quarters by "face shooters". Then, you've made the intentional choice to run a 19, instead of a 17, despite the fact that anyone with more than 5 minutes on a handgun shoots a 17 better, often 15-20% better. You've added a magwell, which is borderline retarded on a concealment piece, so you're just adding further mechanical complexity. Magwells on 19s don't often do that well with large/gloved hands either. Now, we've also added stippling. There are very, very few people who can stipple Glocks without reducing the integrity of the frame/grip. Not a good idea usually on a working gun. And of course, we declare that this is a "special" pistol, for "special" people, as if the concept and application can't then be critiqued. So basically this http://www.bestcarinf.com/manufacturers/honda/honda-civic/honda-civic-ricer/honda-civic-ricer-4.jpg Never go full retard... That car is full retard... 
|
|
Originally Posted By bentron:
Does it count as an RS if you use a G19 MOS or does it have to be a standard G19 milled by ATEi? Don't matter to me, I'm not exactly a purist. I did however pick up a 19MOS today and ordered a Wilson Combat barrel. Plus I want a 1moa dot instead of the 3.5. We'll just call it a Roland variant. 
|
Sell crazy someplace else, we're all stocked up here!
Hindut Obama
Hindut Obama
|
Originally Posted By soowah:
Don't matter to me, I'm not exactly a purist. I did however pick up a 19MOS today and ordered a Wilson Combat barrel. Plus I want a 1moa dot instead of the 3.5. We'll just call it a Roland variant. Originally Posted By soowah:
Originally Posted By bentron:
Does it count as an RS if you use a G19 MOS or does it have to be a standard G19 milled by ATEi? Don't matter to me, I'm not exactly a purist. I did however pick up a 19MOS today and ordered a Wilson Combat barrel. Plus I want a 1moa dot instead of the 3.5. We'll just call it a Roland variant. I think 1moa will be to small and hard to pick up fast, I've got a 3moa & 8moa I shoot the 8 better/faster just my 2 cents. |
Aiming for Alpha's
|
Originally Posted By BigPapaColt:
I think 1moa will be to small and hard to pick up fast, I've got a 3moa & 5moa I shoot the 5 better/faster just my 2 cents. Originally Posted By BigPapaColt:
Originally Posted By soowah:
Originally Posted By bentron:
Does it count as an RS if you use a G19 MOS or does it have to be a standard G19 milled by ATEi? Don't matter to me, I'm not exactly a purist. I did however pick up a 19MOS today and ordered a Wilson Combat barrel. Plus I want a 1moa dot instead of the 3.5. We'll just call it a Roland variant. I think 1moa will be to small and hard to pick up fast, I've got a 3moa & 5moa I shoot the 5 better/faster just my 2 cents. Maybe. I dug out my old TNVC RDP II 3moa dot and played a bit with it. Worse comes to worse I just throw the Trij on a PCC. |
Sell crazy someplace else, we're all stocked up here!
Hindut Obama
Hindut Obama
|
Originally Posted By soowah:
Alright, got this thing together. Who makes a decent holster that has an offset and drop, not thigh rig? Safariland 64340DO for the Glock 34 is supposedly the go-to |
Please, call me Joe
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
<font size=2>Follow me on Instagram!
http://instagram.com/tcba_joe/</font id=s2>
|
Originally Posted By TCBA_Joe:
Safariland 64340DO for the Glock 34 is supposedly the go-to Originally Posted By TCBA_Joe:
Originally Posted By soowah:
Alright, got this thing together. Who makes a decent holster that has an offset and drop, not thigh rig? Safariland 64340DO for the Glock 34 is supposedly the go-to 
|
Read the nametag. You're in my world now grandma.
|
Was wanting to put an RMR on my G19. Saw the Roland Special information and decide to go that way.
So I created my Roland Special, Texas/Suarez Rendition. Took it to the range and was pleased with the performance. If I did my my part, at 30 feet I was able to keep 5-10 shots within 2 inches I decided I need more range time
Glock 19 Gen 4 OEM internals, polish job on trigger bar (from G17 Gen 4), connector ("."), firing pin safety. KKM Precision -Roland Special- Glock Match Drop in Barrel with Compensator Suarez V3 SI-419 RMR slide, Aquaterra finish Trijicon Tritium front and rear suppressor sights "Texas" slide cover plate Trijicon RM02 RMR Surefire X300 Ultra-B The holster is from T.REX ARMS. The Ragnarok style with bladetech paddle Here are some pics: 
|
Warm winds blowing, heatin' blue sky, and a road that goes on forever. I'm glad I'm in Texas!!
Paul Nester
Paul Nester
|
Originally Posted By BCV:
Looks like DARC Originally Posted By BCV:
Originally Posted By TCBA_Joe:
Originally Posted By steve-oh:
roland speshul in the wild? My eyes aren't that good. http://img.photobucket.com/albums/v231/sr338/50CA9840-54AE-45A7-A2E8-C7DC581AC3A0_zpsrbwdwnrb.jpg Looks like it if you zoom in. Where did this picture come from? The rifle setup looks odd, I can't really place it but it looks like it has a KAC can. Looks like DARC Not enough shit on the ground to be DARC lol. And DARC isn't painted black and doesn't have the red stripe on the wall. The walls at DARC are coated in Skittles. |
|
Originally Posted By Stantonizm:
Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. Originally Posted By Stantonizm:
Originally Posted By david0731:
Originally Posted By Airborne_Infantryman:
Originally Posted By david0731:
Would that comp fit another barrel, like a s3f solutions threaded barrel? It won't. The KKM comp uses a proprietary thread pitch. Ok, thanks for the reply. Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. I just ordered one of the Carver Comps to try on my S3F Solutions barrel. Should have everything in hand by Friday. |
|
Originally Posted By twpayne75:
I just ordered one of the Carver Comps to try on my S3F Solutions barrel. Should have everything in hand by Friday. Originally Posted By twpayne75:
Originally Posted By Stantonizm:
Originally Posted By david0731:
Originally Posted By Airborne_Infantryman:
Originally Posted By david0731:
Would that comp fit another barrel, like a s3f solutions threaded barrel? It won't. The KKM comp uses a proprietary thread pitch. Ok, thanks for the reply. Carver makes a comp that's really similar to the KKM comp that works on the standard 1/2x28 thread pitch S3F uses. I just ordered one of the Carver Comps to try on my S3F Solutions barrel. Should have everything in hand by Friday. You'll like it!
|