User Panel
Closing in on 8 k on my 10 21 round 9mm mags unfortunately now running into problems. It appears these mags have a shelf life. Finally went today to test them against oem mags. They are causing lots of malfunctions can barely get trough complete mags.
|
|
Quoted:
Have you made any calculations on how many rounds of .45 can fit in a G21 width, 140mm magazine? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I just got two ETS 22 round mags from Gun Mag Warehouse today. I don't even own a Glock yet. .45 mags are kinda important. My son has a 21. When are they hitting the market? Once the .40s are up and rolling we will turn our attention to the .45 We appreciate your business! Have you made any calculations on how many rounds of .45 can fit in a G21 width, 140mm magazine? That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. |
|
|
Quoted:
Closing in on 8 k on my 10 21 round 9mm mags unfortunately now running into problems. It appears these mags have a shelf life. Finally went today to test them against oem mags. They are causing lots of malfunctions can barely get trough complete mags. View Quote Let's see if it's your springs. The mags shouldn't wear out at the round count you are at. We have a single g17 mag here with over 7k through it now. It still runs fine. Please message me so we can get you the new version of the 22 round spring. |
|
Quoted:
That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
I just got two ETS 22 round mags from Gun Mag Warehouse today. I don't even own a Glock yet. .45 mags are kinda important. My son has a 21. When are they hitting the market? Once the .40s are up and rolling we will turn our attention to the .45 We appreciate your business! Have you made any calculations on how many rounds of .45 can fit in a G21 width, 140mm magazine? That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. After my last post I kinda eyeballed it, putting .45 rounds next to the 22 round mag. I got 18, but it was a hasty, uneducated guess on width and associated stagger of ammo. Either 17 or 18 is an improvement over 13 in the factory mags. Longer 10mm mags are of interest, too. I'm always thinking of justifications to get back into 10mm pistol shooting. I miss my Witness, mostly because it never missed anything! |
|
Ran a 8 stage local match today.
My ETS 17 rounders ran flawlessly. |
|
Quoted:
Unless there are unforseen complications, we will do 10mm mags when we tackle the .45 View Quote View All Quotes View All Quotes Quoted:
Quoted:
Any chance of Glock 20 10mm mags? I own 2 20s, a 40 and an AR lower that all take G20 mags. I'd love to have a huge bunch of 30+ round mags for them. Unless there are unforseen complications, we will do 10mm mags when we tackle the .45 Good deal! Thanks for the reply. |
|
Quoted:
That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. View Quote How tightly does the 19th round fit in the 140mm .40cal mags compared to the 22nd round in the 9mm mags? I'm wondering how easy it is to seat them on a closed slide when fully loaded to 19. With the 9mm mags I download them to 21 for competitions as they're really tight at 22 and might not seat when reloading quickly on the clock. If they're easily reloadable at 19 I'm going to get a ton of them. Would be great to have enough mags that I never need to load one during a whole match |
|
Quoted:
How tightly does the 19th round fit in the 140mm .40cal mags compared to the 22nd round in the 9mm mags? I'm wondering how easy it is to seat them on a closed slide when fully loaded to 19. With the 9mm mags I download them to 21 for competitions as they're really tight at 22 and might not seat when reloading quickly on the clock. If they're easily reloadable at 19 I'm going to get a ton of them. Would be great to have enough mags that I never need to load one during a whole match View Quote View All Quotes View All Quotes Quoted:
Quoted:
That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. How tightly does the 19th round fit in the 140mm .40cal mags compared to the 22nd round in the 9mm mags? I'm wondering how easy it is to seat them on a closed slide when fully loaded to 19. With the 9mm mags I download them to 21 for competitions as they're really tight at 22 and might not seat when reloading quickly on the clock. If they're easily reloadable at 19 I'm going to get a ton of them. Would be great to have enough mags that I never need to load one during a whole match At 19 they have more room than the 22 rounder does. |
|
I emailed about the bad spring Sunday night, and got tracking info this morning.
|
|
Quoted:
Unless there are unforseen complications, we will do 10mm mags when we tackle the .45 View Quote View All Quotes View All Quotes Quoted:
Quoted:
Any chance of Glock 20 10mm mags? I own 2 20s, a 40 and an AR lower that all take G20 mags. I'd love to have a huge bunch of 30+ round mags for them. Unless there are unforseen complications, we will do 10mm mags when we tackle the .45 Anytime soon? I have a G40MOS in bound and need some mags. |
|
Quoted:
Anytime soon? I have a G40MOS in bound and need some mags. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Any chance of Glock 20 10mm mags? I own 2 20s, a 40 and an AR lower that all take G20 mags. I'd love to have a huge bunch of 30+ round mags for them. Unless there are unforseen complications, we will do 10mm mags when we tackle the .45 Anytime soon? I have a G40MOS in bound and need some mags. It will be at least 6 months |
|
I ordered 2 of the 31rd 9mm rounds and I can not wait for them to show up so my 19 can look awesomer!
|
|
|
|
Quoted:
At 19 they have more room than the 22 rounder does. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
That's a good question. In .40 a 140mm will hold 19. So in .45 I'm guessing 17. How tightly does the 19th round fit in the 140mm .40cal mags compared to the 22nd round in the 9mm mags? I'm wondering how easy it is to seat them on a closed slide when fully loaded to 19. With the 9mm mags I download them to 21 for competitions as they're really tight at 22 and might not seat when reloading quickly on the clock. If they're easily reloadable at 19 I'm going to get a ton of them. Would be great to have enough mags that I never need to load one during a whole match At 19 they have more room than the 22 rounder does. Excellent! Looking forward to these. |
|
|
Forgive me for only skimming the 19 pages, but it appears there was some issues with springs in the 22 round 9mm mags but now there is a new version being used. Do I have that correct? I'd like to give these a try.
|
|
|
Quoted:
Forgive me for only skimming the 19 pages, but it appears there was some issues with springs in the 22 round 9mm mags but now there is a new version being used. Do I have that correct? I'd like to give these a try. View Quote Yes there was a spring re-design back in late September. |
|
Quoted:
Yes there was a spring re-design back in late September. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Forgive me for only skimming the 19 pages, but it appears there was some issues with springs in the 22 round 9mm mags but now there is a new version being used. Do I have that correct? I'd like to give these a try. Yes there was a spring re-design back in late September. And it's safe to assume all mags are shipping with the new springs? |
|
Quoted:
And it's safe to assume all mags are shipping with the new springs? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Forgive me for only skimming the 19 pages, but it appears there was some issues with springs in the 22 round 9mm mags but now there is a new version being used. Do I have that correct? I'd like to give these a try. Yes there was a spring re-design back in late September. And it's safe to assume all mags are shipping with the new springs? Yes, all of the mags we are shipping and have shipped since late September have the new springs. That said, if you purchase from one of our dealers and it turns out to be older stock with the old spring (and that spring gives you trouble, it was a very small % of failures) we will replace the spring for you, so no need to worry. |
|
Snip quote tree
Yes, all of the mags we are shipping and have shipped since late September have the new springs. That said, if you purchase from one of our dealers and it turns out to be older stock with the old spring (and that spring gives you trouble, it was a very small % of failures) we will replace the spring for you, so no need to worry. View Quote Thanks for the prompt replies, I just ordered a couple to try out. |
|
|
Thanks to ETS mags I am finally able to see why glock mags rattle! Thanks ETS!
|
|
|
Installed the new springs. However one of the mags the follower now keeps popping out the top and I am not sure if I will need another follower or a mag Body. Def seeing wear on the bodies and followers.
|
|
Quoted:
Installed the new springs. However one of the mags the follower now keeps popping out the top and I am not sure if I will need another follower or a mag Body. Def seeing wear on the bodies and followers. View Quote There is a small tab on the front right of the follower that's keeps it in the mag. It could have broken off. We can get you a new follower. |
|
Just popping in for positive comments
Have 5 ETS 9mm mags, 3-17's and 2-31's all recent manufacture bought from Aim. Loaded all to capacity and fired them back to back in NFA Glock mag lower. All fed and locked back. Loaded them all up again to capacity and fired back to back in newer gen4 gray frame 19 supressed, same drill and same results. Will buy more, especially in .40 and .45. |
|
Out of the 6 Glock 17 ETS mags that I have that I use for USPSA, I had to remove one out of the rotation yesterday.
At a match I was having FTF issues with it. Once I removed it, and replaced it with another ETS mag the issues went away. Not many rounds through that mag, maybe 600 rounds. |
|
Quoted:
Out of the 6 Glock 17 ETS mags that I have that I use for USPSA, I had to remove one out of the rotation yesterday. At a match I was having FTF issues with it. Once I removed it, and replaced it with another ETS mag the issues went away. Not many rounds through that mag, maybe 600 rounds. View Quote It should not have a problem. Please contact customer service so we can replace that mag for you. We have a G17 mag with over 7k rounds through it. It still works with no problems. |
|
Just submitted a spring request for a couple 22 rounders due to feeding issues. Have A couple thousand through both and they started to see some issues. I thank you guys for being upfront and on it when it comes to these things. Unlike that Mako fiasco over the past few years, thank you!
|
|
We wouldn't do it any other way. Hard as we try, we aren't perfect. But we are always improving our products and processes. We believe that as long as we stand behind our products and take care of our customers we will always be heading in the right direction.
As always, we appreciate everyone's support. PS we have some exciting products coming in the next few weeks! |
|
|
Quoted:
We wouldn't do it any other way. Hard as we try, we aren't perfect. But we are always improving our products and processes. We believe that as long as we stand behind our products and take care of our customers we will always be heading in the right direction. As always, we appreciate everyone's support. PS we have some exciting products coming in the next few weeks! View Quote Free orange followers |
|
I got two in the mail today to try out and noticed a few things. First was that they didn't load right. They didn't stagger the rounds properly and I was only able to fit 15 per for 17 round mags. I unloaded and reloaded and 17 went in fine.
Also they don't drop free when full. Is that because the sides bulge a bit? |
|
Quoted:
I got two in the mail today to try out and noticed a few things. First was that they didn't load right. They didn't stagger the rounds properly and I was only able to fit 15 per for 17 round mags. I unloaded and reloaded and 17 went in fine. Also they don't drop free when full. Is that because the sides bulge a bit? View Quote Did you chamber the first round? It should always drop once that first round is chambered. |
|
Quoted:
It should not have a problem. Please contact customer service so we can replace that mag for you. We have a G17 mag with over 7k rounds through it. It still works with no problems. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Out of the 6 Glock 17 ETS mags that I have that I use for USPSA, I had to remove one out of the rotation yesterday. At a match I was having FTF issues with it. Once I removed it, and replaced it with another ETS mag the issues went away. Not many rounds through that mag, maybe 600 rounds. It should not have a problem. Please contact customer service so we can replace that mag for you. We have a G17 mag with over 7k rounds through it. It still works with no problems. Talked to Jim today, he took care of me. Thanks for helping, I appreciate it. |
|
All my ETS mags are still running well. New springs in the 22s and I couldn't be happier. Just ordered 10 more 31s from Botach. My AR9 loves these mags too, thanks again ETS for not only a good product at a good price but for the great customer service.
|
|
I've found that the 40S&W mags don't feed 357sig very well (FTF). I know, they aren't designed for 357sig, but my glock and SGMT 40S&W mags don't have any issues feeding 357sig. I think it is caused by thicker feed lips. I've probably only shot 500 rounds through my 2 ETS magazines and most of the issues are with cambering the first round. I can make them work reliably if I make sure the round is seated perfectly, but it's very finicky and would never work coming out of a mag pouch. Just thought people here would like to know. They work great feeding 40S&W obviously.
I don't know if anyone has reported this issue before but I thought I'd leave it here. |
|
I purchased two 17 round and two 22 round 9mm mags this morning through Brownell's. Looking forward to putting them through their paces.
|
|
I saw the option for a 12 round 380 mag, going to buy a 42 now.
anyone put a tti+5 on an ets17 |
|
|
Quoted:
anyone put a tti+5 on an ets17 View Quote I haven't tried an extension on the 9mm mags, but I did on the 16 round .40 ETS mags. I tried a TTI extension first and could only load up to when the follower reached the extension (16 or 17 rounds, I forget). I tried lightly sanding on the follower, but couldn't get it to work. I think I saw someone on here post that they could get a TTI extension to work though, so maybe if I experimented with different followers and extension I could've gotten it to work, but I gave up at that point and tried a Dawson extension. The Dawson worked and gives me 20 rounds reloadable vs. only 19 reloadable with OEM mags and the same extensions. |
|
I just got 4 of the 31rd 9mm magazines. They look nice, and the first one loaded just fine with 30 rounds of brass Freedom Munitions 9mm.
However, on the next magazine, I decided to load it with Tulammo 9mm. I loaded about 7 or 8 rounds, and then found the rounds binding in the magazine body, sticking the follower in place. Has anyone else had this problem? I proceeded to load the magazine with more brass ammunition with no issue. |
|
Quoted:
I just got 4 of the 31rd 9mm magazines. They look nice, and the first one loaded just fine with 30 rounds of brass Freedom Munitions 9mm. However, on the next magazine, I decided to load it with Tulammo 9mm. I loaded about 7 or 8 rounds, and then found the rounds binding in the magazine body, sticking the follower in place. Has anyone else had this problem? I proceeded to load the magazine with more brass ammunition with no issue. View Quote I have noticed slight binding with steel ammo |
|
Quoted:
I just got 4 of the 31rd 9mm magazines. They look nice, and the first one loaded just fine with 30 rounds of brass Freedom Munitions 9mm. However, on the next magazine, I decided to load it with Tulammo 9mm. I loaded about 7 or 8 rounds, and then found the rounds binding in the magazine body, sticking the follower in place. Has anyone else had this problem? I proceeded to load the magazine with more brass ammunition with no issue. View Quote We have has some(6 or so customers) contact us about Tullamo binding in their mags. There is no doubt that steel rounds have a lot more friction but tulammo is the only brand we've had complaints about. We also have a bunch of customs that run it with no problems. Break the mags in and let us know if you continue to experience problems. We appreciate your business! |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.