Posted: 2/15/2011 6:32:22 PM EDT
| I just bought a used but minty gen 2 17(still has a little copper lube on the rails) and it shoots great but I have a small problem. The single pin just above the trigger that goes through the frame keeps walking out and I have to use a bunch to seat it back level in the frame. It only walks out about 1/16" after about 100 rounds. Is this a problem to worry about and is there a fix for it? Thanks! |
| I encountered such an issue once before - someone had used a punch and mallet to wack that pin out forcefully during a detail strip instead of jiggling the slide release a bit to get the pin to slide out easily. Replacing the pin cured the problem. They're cheap, and that's the first thing I'd try in your position. |