Posted: 10/3/2010 8:27:20 PM EDT
| Hi I have a early 2 pin 17. I also have a 3 pin 23. The trigger pin on the 17 will not come out. The 23 comes a part no problem. I have whacked it prety good with the punch and plastic mallet. any Ideas? Thanks |
|
Quoted:
Quoted:
Yes this, and do NOT be "whacking" it with hammer or mallet.Quoted:
Wiggle the slide stop lever. +1 - while at the same time applying steady pressure to the pin using the takedown tool / or punch. 
Yep just got a 2 pin G17 and you have to wiggle the slide stop a little more to get the pin out. Definately DO NOT be wacking it with anything. Make sure you check the slide stop when you get it apart. |
| Thank you guys. I got it apart. I used to work part time at a Gun store. The Guy I worked with went to Glock Armor school. He used to whack them all the time. Guess he was a hack. I gave it one hit with the Glock take down tool and a smal plastic hammer. Nothings bent or messed up. I won't do that again. Thanks again everyone. |
|
Quoted: I used to work part time at a Gun store. The Guy I worked with went to Glock Armor school. He used to whack them all the time. Guess he was a hack. Even Glock armorers can be stupid. I was trained in the Army to be an Armorer and no one else works on my weapons, no one! |