AK Sponsor
Posted: 2/12/2013 12:16:28 AM EDT
|
I just recieved my Krink booster from cnc warrior. When I installed it, it would tighten and I was not able to make it reach the next detent notch. To lock it, I would unscrew a bit to reach the previous notch..This locks it but the booster had way too much play. After several tries, I decided to get more leverage buy placing a screwdriver in the front notches of the booster to tighten to that detent notch I previously could not reach. At this point, the booster is locked with the detent pin and has no play..
I hope someone can help me with this question. I've seen many pics of Krinks with booster, and the booster seems to go all the way back to the front sight. On mine, it is about 1/8" away from front sight.. Is my gun ok like this, or is something wrong? If you guys installed booster, did you have similar results? thanx.. |
|
EL,
I had the exact same problem with CNC Warriors krink booster. I returned it. I ordered a krink booster from AK Builder and it fits like a champ, threads all the way to the front sight block. Seems CNC Warriors are not threaded all the way for some reason. If it bothers you like it did me, order one from AK Builder, top notch booster. |
AK Sponsor