AK Sponsor
Posted: 5/25/2011 6:24:14 PM EDT
| need help i installed the underfolder on my draco but failed to have the pistol grip nut installed. now i need to know where to drill the pin removal hole in the receiver does anyone have a location/ measurement? or how to install the nut with folder in place? thanks |
|
I can tell where not to drill it, dead center. Mine has two holes. And remember, it only has to be big enough to get a punch in there. The pin gets pushed out to the top. It does not have to be perfect, you can always push the release button to line up the hole and pin. Its about 1/4 inch from center. I knew I should have taken a picture, but I didnt want to show my blunder with two holes.
As for the nut, you gotta pull everything back out, the nut has to go in first. |
AK Sponsor