AK Sponsor
Posted: 10/28/2008 3:21:34 PM EDT
|
I am looking at a polish Interarms tantal from Atlantic firearms.
1. Are the cheapest place to get one of these rifles? 2. Will the grenade launching brake remove like a standard brake (push spring detent into FSB and unscrew)? 3. What is the thread pitch on the threads is it 24 or 22 mm? Thanks. 
|
|
Be careful about those Interarm Tantals, I suggest you buy one where you can inspect it first.
I bought one over GB, and it's rusted on feed ramp, inside of teh receiver, trigger guard and some part just above the trigger guard. When I called them about this, was told it is normal and there is nothing they can do about it. |
|
Quoted:
Be careful about those Interarm Tantals, I suggest you buy one where you can inspect it first. I bought one over GB, and it's rusted on feed ramp, inside of teh receiver, trigger guard and some part just above the trigger guard. When I called them about this, was told it is normal and there is nothing they can do about it. Why be careful? Because you bought a tantal off gunbroker? Which more than likely test fired with surplus ammo and not cleaned afterwards...... Your rust issues have nothing to do with interarms 
Take the rust off with WD40, then degrease the rifle and add a nice moly resin finish. Dont get me wrong i would be pissed if i bought a rifle that had that much rust, but it has passed a few hands before it got to you. Dumb asses test these rifles for keyholing and dont clean.. OP, when i get some time i'll post a pic of my tantal w/ a FSC47 muzzle brake on her. That Tit at the end of the muzzle can be a bitch. |
AK Sponsor