AK Sponsor
Posted: 1/28/2007 1:56:13 PM EDT
|
I have a century underfolder that the stock seems somewhat loose on it. Is there a way to tighten it. Its loose side to side and up and down. If that make any sense. thanks |
Yes it makes sense. Look at the side of the receiver under the right side lock (push the button on the left and look on the right), you will see a round nut that has a pin in it. Push the pin out and spin the nut a turn to tighten and put the pin back. This should help with the side to side. As for the up and down there is some play in all I have seen, but this is a function of pin vs receiver holes and is not readily fixable without putting a little weld there and redrilling the holes. Someone else may have a better idea thatn this though. |
AK Sponsor