AK Sponsor
Posted: 9/4/2014 4:11:37 PM EDT
|
Does anyone make a stock adapter that goes on the SLR106ur or the SLR107ur that just has the AR15 threading so I can install an AR stock? I've seen the ones that has the whole buffer tube setup but I just want the AR style threading so I can install a AR collapsible wire stock.
Thanks! CSF |
|
http://www.srvv.org/en/catalog/1657/48954/ this is what u want but its impossible to find most of the time.... I made my own from a piece of "L" shaped steel.. bolted thru the pistol grip screw hole and I drilled a small hole close to back of receiver and used a 2nd bolt to secure it.. instead of the ar buffer tube i used a piece of square tubing welded to it so that a triangle stock would slide back and forth on ( I used a airsoft steel folder I got on ebay for 10.00 bucks) and made my own "bump fire " stock that looks almost exactly like a regular krink stock
john in Houston 
|
|
Originally Posted By badassjon:
http://www.srvv.org/en/catalog/1657/48954/ this is what u want but its impossible to find most of the time.... I made my own from a piece of "L" shaped steel.. bolted thru the pistol grip screw hole and I drilled a small hole close to back of receiver and used a 2nd bolt to secure it.. instead of the ar buffer tube i used a piece of square tubing welded to it so that a triangle stock would slide back and forth on ( I used a airsoft steel folder I got on ebay for 10.00 bucks) and made my own "bump fire " stock that looks almost exactly like a regular krink stock john in Houston That adapter uses a 5.5mm stock pin which is not compatible with the 106/107 series which uses a 4.5mm pin and a slightly different angle to the rear trunnion. |
AK Sponsor