AK Sponsor
Posted: 6/14/2005 10:04:31 AM EDT
|
Two questions: What rail systems are available for the VEPR? I am looking for both a top rail for a sight (I know unitek makes one..any others out there) as well as a bottom rail for any other attachments? Are any M4 stock adapters available for the VEPR? Will an AK one work? What would be involved in installing one? |
I mounted a weaver rail I purchased at walmart for a marlin lever gun on the bottom of my 7.62x39 handgaurd. The holes in the handgard and the holes in the rail matched perfect all I had to do was dig through my extra fastners to see what would work. I also have an AR stock on my .223 K. I got the cut the tang off reciever block from Ace and what they call a pig nose which is an AR stock adapter. In short the reciever block took a little fitting but not a lot and I did not have to cut the tang off. I had to notch the back of my ergo grip that I installed on it and thats it. It looks good. I wish I had pics. The CAR stock is what was on it but I did not like it so I put an A2 stock on ot. I can always put the CAR back on or get a viltor. ACE is where to get the reciever block and adapter. http://www.riflestocks.com/ak.htm |
I wish you did too  Do you think the rear "stock" modification is something most anyone can do? I don't have a machine shop or anything, but I do have enough mechanical ability to assemble an AR15 from parts. If I can replace the VEPR rear stock with an AR15 CavArms C1 stock (A1), then there is NO other reason for me not to get one as the stock was my biggest hold-out. Thanks! |
AK Sponsor