Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/2/2006 7:01:37 AM EDT
On the new WASRs, I see slant breaks and threaded muzzles. Can you screw them off and reinstall US muzzle devices? Otherwise, the threaded muzzle is kinda moot...
Link Posted: 1/6/2006 9:39:49 PM EDT
I can screw mine off. I have replaced the slant break with a muzzle break. Don't know if all of the WASR-10s have threaded muzzles though.
Link Posted: 1/6/2006 11:50:02 PM EDT
yeah mine's has a slant muzzle that can be screwed off for another if you'd like.
Link Posted: 1/7/2006 7:53:09 AM EDT
Screwed the slant brake off my WASR10 and replaced with a AK74 type flask hider. Remember it has reverse threads.
Link Posted: 1/8/2006 12:33:18 AM EDT
My bro's GP WASR-10 had a muzzle nut threaded on and tack welded. All I did was grind through the weld, take the nut off, and screw on a new 14x1mm LH slant brake.
Link Posted: 1/14/2006 3:08:58 PM EDT
Both mine have 1/2"X20 R.H. threads which force me to convert standars attatchments by boring out the existing L.H. 14mm threads, sleveing and re-threading to fit the existing muzzle.
Link Posted: 1/21/2006 2:36:29 PM EDT

Originally Posted By RABID:
Both mine have 1/2"X20 R.H. threads which force me to convert standars attatchments by boring out the existing L.H. 14mm threads, sleveing and re-threading to fit the existing muzzle.



my gp-wasr-10 is the same wayhave. it's an early no-ban, with an 82 dated trunnion.
Link Posted: 1/21/2006 7:29:37 PM EDT

Originally Posted By RABID:
Both mine have 1/2"X20 R.H. threads which force me to convert standars attatchments by boring out the existing L.H. 14mm threads, sleveing and re-threading to fit the existing muzzle.

Are ya sure they are 1/2x20rh? I believe if ya try a pitch gauge that they should check out as a 1/2x28rh thread. If ya check Global trades website, they've already got a lot of muzzle breaks, US made that are in the "new" 1/2x28 thread. I just did the threads and put a slant break on my WASR 10 in 1/2x28. Better check 'em first.Madtechcool
Link Posted: 1/21/2006 7:49:35 PM EDT
I have a WASR-10 Century does indeed thread the barrel 1/2-20 RH, which is a bastard size indeed. I marred my slant up badly while removing it, and can not seem to buy a replacement. I bought a birdcage break but it was threaded the AK standard 14mm LH. I drilled it out, and tapped it for a 1/2-20 Helicoil, put the helicoil in, and it worked flawlessly. I have several 1/2 coils left, so I think if I ever want to put a slant back on, I can buy one 14mm, and just put another coil in. So try buying a 1/2-20 helicoil kit. Good Luck!
Link Posted: 1/22/2006 8:46:41 AM EDT
mine is also 1/2"x20rh.
Link Posted: 1/22/2006 8:50:43 AM EDT
i have access to a lathe and mill im gonna make a 3" rpk style without the slot on the bottom.
Link Posted: 1/22/2006 10:26:29 AM EDT

Originally Posted By kletus:
i have access to a lathe and mill im gonna make a 3" rpk style without the slot on the bottom.



Make 2 and send me one, I'm in the same boat you are!!!
Top Top