[ARCHIVED THREAD] - hammer not locking back

Posted: 10/22/2006 5:51:54 PM EDT

I built a romy pistol with the imported trigger internals. i have had this problem both times I took it to the range. I can fire a full 30 rounder without any problems, but the second clip the hammer doesnt lock down every time, it feeds the round but when i pull the trigger it doesnt fire, then i look at the bolt thru the dustcover i can see the hammer is up.any ideas what is causing this? I looked at the hammer and trigger both look fine, and dont have any major wear on them, so i dont think anything is worn out.
Thanks

Posted: 10/23/2006 9:56:48 AM EDT

[#1]

Seems many Aks will work fine if you hold the trigger back after each shot,but release early or try to bumpfire and the hammer will follow the bolt back down...maybe this is what's happening?

Posted: 10/23/2006 3:56:04 PM EDT

[#2]

but the first 30 mag fires great, its the next mag that gives the problems. its happened both times i took it to the range. could it be something heating up and causing it?

[ARCHIVED THREAD] - hammer not locking back

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - hammer not locking back

[ARCHIVED THREAD] - hammer not locking back