Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
6986 Online
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
AR15.COM
bravocompany
My Account
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
colt
vortex
silencerShop
GS
JRH
midwest
aim
OSIGHT
Guns
DFC
RS
bravocompany
cz
skd
springfield
brownells
Holosun
geissele
primaryArms
palmetto
fightlite
magpul
6986 Online
GS
cz
primaryArms
magpul
Holosun
palmetto
fightlite
geissele
vortex
brownells
RS
bravocompany
OSIGHT
skd
JRH
Guns
silencerShop
midwest
springfield
aim
colt
DFC
AK Sponsor
Sponsor News Introducing TNVC's NEW and Exclusive Filmed SuperGain (FSG) and Chimera Panoramic Goggle Giveaway!
Site News The People of Virginia VS Grabigial BanBerger | ARFCOM News
11/7/2005 5:50:03 PM EDT
Rifle: MAK-90

When firing, sometimes the bolt stops about half way into chambering a round.

I figured it was a magazine or ammo problem at first; however, I can reproduce the jam without ammo or a mag.

If I pull back on the bolt, and lift upwards as it slides forward, the bolt stops as the back end of the bolt gets to the second set of notches in the receiver.  

The first pic shows the location where the jam occurs (spring and cover removed for visual aid).




This next pic (sorry for the blur) highlights which part of the bolt is comming out of the tracks.



Anyone have any suggestions?  It seems like the hammer is forcing the bolt up; others have mentioned dremeling down the hammer some, but I'm not sure it would help me.

All comments/ideas are welcome.
If you need a better description, or better pics, let me know.
11/8/2005 11:57:12 AM EDT
[#1]
 Is your hammer axis pivot pin for dead sure seated all the way through and through the right, safety lever side of the receiver?
11/8/2005 2:28:56 PM EDT
[#2]
Put the chicom FCG back in and try it. I bet it will work just fine. And definitely check those axis pins.
11/8/2005 7:35:44 PM EDT
[#3]
That carrier should not be coming out of the rails!  Regardless of what is pushing it up.

Have you mic'd the receiver to see if it is bulged?  Not completely uncommon.  I would suggest you get it looked at by a smith familiar with ak's before shooting any more.  Looks like trouble.

cya
11/9/2005 1:21:32 PM EDT
[#4]
Man, that looks weird, kinda like a left handed AK...
11/9/2005 6:31:16 PM EDT
[#5]
Quoted:
Put the chicom FCG back in and try it. I bet it will work just fine. And definitely check those axis pins.


haven't touched the FCG, was thinking about Americanizing it, though.
11/9/2005 6:32:23 PM EDT
[#6]
Quoted:
That carrier should not be coming out of the rails!  Regardless of what is pushing it up.

Have you mic'd the receiver to see if it is bulged?  Not completely uncommon.


I never considered that - will look into it.  

thanks.
11/9/2005 6:33:08 PM EDT
[#7]
Originally Posted By Hammer in PA:
Man, that looks weird, kinda like a left handed AK...


well, i took the pics upside down, then flipped them in an image editing program - so it may appear mirrored.

good catch, lol, now that i look at it, it does look goofy.
11/9/2005 6:41:33 PM EDT
[#8]
Quoted:
 Is your hammer axis pivot pin for dead sure seated all the way through and through the right, safety lever side of the receiver?


"hammer axis pivot pin", pardon my lack of knowledge, but is that the pin the hammer rotates about?  (The pin that goes through the hammer horizontally?)
11/12/2005 1:07:00 PM EDT
[#9]
 Sorry for the awkward term.  Yes, the one the hammer rotates about.
AK Sponsor
geissele
palmetto
primaryArms
blackhills
ar15com
springfield
ar15com
bravocompany
CA
RS
brownells
LAPG
LAPG
fightlite
gray
cmmg
Faxxon
Pro2A
SAS
ar15com
colt
THBRD