AK Sponsor
Posted: 12/26/2008 8:14:52 AM EDT
|
I had purchased a krink sbr a while back from a local ffl dealer. Here is my problem. I shoot and it fires bolt goes back to catch another round but instead of loading another round it just sits there behind the round. You have to manually push the bolt foward each time after firing. Thanks for the help
ETA: Ok after further looking into this. You can take the Magazine out and it does the same thing. The bolt holds itself to the rear. |
| Ok FYI for everyone. I found out my problem the rails on the receiver were catching the bolt carrier. To fix this I contacted the manufacture of the receiver not the builder. The manufacture stated to take a rubber mallet or a dead blow hammer and strike the bolt carrier in the place that its hangs up (On the side with the reciever cover off). This sounds rough but it actually worked. Thanks for all the responses and I hope this might help someone else out. |
AK Sponsor