[ARCHIVED THREAD] - G2 trigger not resetting

Posted: 5/2/2006 6:07:01 PM EDT

feels like spring is weak. common problem? am i doing something wrong?

Posted: 5/3/2006 12:24:58 AM EDT

[#1]

Spring or it could be catching on the receiver cut-out.

Posted: 5/3/2006 2:42:22 AM EDT

[#2]

Quoted:
Spring or it could be catching on the receiver cut-out.

receiver cut out? I have no idea what that is, but it sounds right. to get teh safety back in I had to 'convince' the G2 to move. did I movce it the wronmg way or something.?

Posted: 5/3/2006 4:20:11 AM EDT

[#3]

did you put the required "sleeve" in with the parts?

Posted: 5/3/2006 4:26:22 AM EDT

[#4]

Quoted:
did you put the required "sleeve" in with the parts?

came installed. what should I look for. (I have a new one that I was gonna put in and found one in already.)

Posted: 5/3/2006 5:33:06 AM EDT

[#5]

rear trigger cross pin is NOT tight. do I need a different one?

Posted: 5/3/2006 7:04:21 AM EDT

[#6]

Quoted:
did you put the required "sleeve" in with the parts?

Damn your good... it sounds like thats his problem.

-1

Posted: 5/3/2006 8:18:31 AM EDT

[#7]

Did you install that little spring between the trigger and the disconect?

Posted: 5/3/2006 9:11:03 AM EDT

[#8]

Make sure the spring is in the discon correctly and check for the sleeve. see picture

The G2 is a very good trigger system.

Ken RSA

Posted: 5/3/2006 10:52:04 AM EDT

[#9]

Quoted:
feels like spring is weak. common problem? am i doing something wrong?

I believe you installed a double hook in a SAR rifle? Sometimes the front part of the trigger will rub the receiver and the back side of the trigger can catch on the receiver on its reset. If this happens you have to fit the trigger to the receiver or open up the receiver cutout a bit with a file. I just contour the trigger areas that rub with a dremel.

Posted: 5/3/2006 11:48:54 AM EDT

[#10]

Quoted:
Quoted:
feels like spring is weak. common problem? am i doing something wrong?

I believe you installed a double hook in a SAR rifle? Sometimes the front part of the trigger will rub the receiver and the back side of the trigger can catch on the receiver on its reset. If this happens you have to fit the trigger to the receiver or open up the receiver cutout a bit with a file. I just contour the trigger areas that rub with a dremel.

i8.photobucket.com/albums/a18/MakarovshooterinAZ/G21.jpg
i8.photobucket.com/albums/a18/MakarovshooterinAZ/G22.jpg

nah she's a single hook. I'm 99% sure the problem is that he G2 was put in without the 'sleeve' as it is very loose on teh inner right side.

[ARCHIVED THREAD] - G2 trigger not resetting

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - G2 trigger not resetting

[ARCHIVED THREAD] - G2 trigger not resetting