Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/8/2006 8:53:54 AM EDT
Does anyone know if the Century build (DC Industies) Yugo M70's slanted break is silver soldered on? If not, is it a left or right hand thread?
Link Posted: 3/8/2006 9:23:17 AM EDT
Link Posted: 3/8/2006 1:18:00 PM EDT
That means you turn the brake clockwise to loosen it?
Link Posted: 3/8/2006 1:24:13 PM EDT
Link Posted: 3/8/2006 1:38:55 PM EDT
Not, left. and they dont fit right, get some sort of tool to help twist it off while pressing down the pin.
Link Posted: 3/8/2006 1:59:56 PM EDT
Link Posted: 3/8/2006 2:02:32 PM EDT
[Last Edit: 3/8/2006 2:03:27 PM EDT by Dawg180]
They are not soldered on. Make sure you are turning it the correct direction which is "righty loosey, lefty tighty" since the threads are left handed, or in simple terms are reversed to what most Americans are used to. Use a pin punch of something to hold down the detent if your fingernail is not tough enough.

It should be very easy to remove unless someone screwed it in too far, you are not derpessing the detent, or you are turning it the wrong way. In the even it is stuck, some penetrating oil and a good grip with a glove should do the trick.
Link Posted: 3/8/2006 2:28:58 PM EDT

Originally Posted By thedukeryan:

Originally Posted By Zip:
Not, left. and they dont fit right, get some sort of tool to help twist it off while pressing down the pin.


So the Century barrels are threaded right hand threads



As answered to "is it a left or right hand thread?"

Left.
reading > you.
Link Posted: 3/8/2006 7:26:38 PM EDT
let us know if you are able to take it off. i have one and it did not want to move at all. maybe it is welded on?
Top Top