Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/5/2006 10:15:00 PM EDT
Searh the web high and low can't seem to find them. Want to put it on an slr105 .If you guys know where to get'em let me know.
PS I have checked gunbroker with varying searches and it seems noone is selling them.
Link Posted: 3/6/2006 5:28:47 AM EDT
Link Posted: 3/6/2006 6:43:56 AM EDT
Wow thanks. Now the next question is will these fit a stamped slr105? I seen a few pics of them on a 105 but not sure if these are the exact same ones.
Link Posted: 3/6/2006 4:00:08 PM EDT
Yes they will fit the SLR105. Post pictures when you get the stock mounted!
Link Posted: 3/6/2006 4:40:24 PM EDT
This is my SLR with the stock.

I have an extra one that has never even been drilled for the mounting holes. IM me if you are interested in purchasing it off me.





Link Posted: 3/6/2006 5:41:21 PM EDT
There are two versions that RPB sold. The original was aluminum, and quite tough. The later one was plastic from what I heard.

take care,
Tec
Link Posted: 3/6/2006 8:17:15 PM EDT

Where can you get ones that actually fold?
Link Posted: 3/6/2006 8:28:37 PM EDT
The plastic one that I have now is great, sturdy and strong and have gone 1000 rounds in my 5.45. The Aluminum ones screws would strip out after a few rounds. I've had two. I don't know if they were bad batches or something, but it wasn't a good experience...
Link Posted: 3/6/2006 8:30:00 PM EDT

Originally Posted By JDizzle:
Where can you get ones that actually fold?




The hardware itself can be found on the EE or via sellers like ruseller. Your receiver will have to be modified however. Get your wallet ready for the pain...
Link Posted: 3/6/2006 9:48:08 PM EDT
Lxpony, check your IM. Also post here if you recieved it or not as I don't check my IM's to often.
Link Posted: 3/7/2006 6:51:43 AM EDT

Originally Posted By JDizzle:
Where can you get ones that actually fold?



Real Com-bloc ones can be had at www.k-var.com sometimes.

Link Posted: 3/7/2006 4:27:27 PM EDT

Originally Posted By 0612Devil:
The plastic one that I have now is great, sturdy and strong and have gone 1000 rounds in my 5.45. The Aluminum ones screws would strip out after a few rounds. I've had two. I don't know if they were bad batches or something, but it wasn't a good experience...



My AK-74 wore one of the aluminum RPB stocks for a couple years, and the stock now resides on my Saiga-12. Even under 12-gauge recoil, I've never had a problem with the screws stripping or backing out.
Link Posted: 3/7/2006 4:42:31 PM EDT

Originally Posted By Shooter521:

Originally Posted By 0612Devil:
The plastic one that I have now is great, sturdy and strong and have gone 1000 rounds in my 5.45. The Aluminum ones screws would strip out after a few rounds. I've had two. I don't know if they were bad batches or something, but it wasn't a good experience...



My AK-74 wore one of the aluminum RPB stocks for a couple years, and the stock now resides on my Saiga-12. Even under 12-gauge recoil, I've never had a problem with the screws stripping or backing out.



Ditto. My aluminum version is still rocking with no signs of wear. The tang end is a solid block of milled aluminum, so I don't see how it could strip out with a correctly sized machine screw...it just ain't gonna happen. FSE went with plastic due to cost.

take care,
Tec
Link Posted: 3/7/2006 5:23:08 PM EDT

Originally Posted By AKuzer:
Lxpony, check your IM. Also post here if you recieved it or not as I don't check my IM's to often.



response sent
Link Posted: 3/7/2006 5:49:31 PM EDT
PLsease check IM again arfcom deleted to quickly!
Link Posted: 3/7/2006 6:22:30 PM EDT
email sent per your request
Top Top