Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/8/2006 7:05:14 AM EDT
[Last Edit: 2/8/2006 9:30:27 AM EDT by mykrowyre]
Last outing I had some problems with my SAR-2. Occasionally it would slip and let off a 3rd burst. Pulled it apart and found that the previous owner had taken off too much when he did the trigger job and slap fix. As fun as it was, I have removed the trigger. I briefly considered adding metal with my mig welder but maybe not a good idea. I need a new SAR-2 trigger only, not the entire group.

Anyone know where I can find only the century us made trigger? I didn't notice if there is a difference between the ak74 and the ak47 trigger. I don't feel like spending 60 bucks for the entire FCG.

Link Posted: 2/8/2006 8:08:45 AM EDT
Get a tapco g2 find them pretty easily. They work in both 7.62 and 5.45.
Link Posted: 2/8/2006 9:05:03 AM EDT
you need a new disconect not trigger
unless the did some work on the top of the hammer (i have seen also )

a pic would help us see what they have messed with
i think global sells a new us sear for fairly cheap i would try that :)
Link Posted: 2/8/2006 9:29:59 AM EDT

Whoops did I say sear, I meant the trigger hook...

The only thing he modified on the disconnector was the back of it, but the trigger hook has been modified for a light single stage pull. Looks like too much was taken off (it's obvious that it was modified when you look at it).


Top Top