Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/15/2005 3:54:47 PM EDT
What is it? Is it the pin that holds the brake in place? If it is do I need a spring and roll pin to hold it in and what size hole and how deep do I put in the sight base? Thanks.
Link Posted: 12/15/2005 5:19:18 PM EDT
We need more info. What exaclty are you trying to do?
Link Posted: 12/16/2005 12:24:49 PM EDT
[Last Edit: 12/16/2005 12:25:33 PM EDT by j3_]
www.polytechparts.com/cgi-bin/hazel__ak-store.cgi? Under barrel and receiver it is the third part. Is this what I need?

Trying to hold the slant muzzle brake in the correct postion but do not know what parts are needed. The Mak 90 I have has no provisions to hold the brake in the right postion.
Link Posted: 12/16/2005 1:15:13 PM EDT
Oh yes - that's what you need. Press out the front pin in FSB, drill for plunger, install spring and plunger, then hold it down and press the FSB pin back in. I did one.
Link Posted: 12/16/2005 2:14:16 PM EDT

Originally Posted By Schulze:
Oh yes - that's what you need. Press out the front pin in FSB, drill for plunger, install spring and plunger, then hold it down and press the FSB pin back in. I did one.

Yes, the spring, don't forget the spring!
Top Top