AK Sponsor
Posted: 7/9/2005 5:14:46 PM EDT
|
So which trigger group should I get, the G2 or the FSE that Krebs sells ??? I'm already leaning toward the G2 since I can't afford the RSA Trigger System ... |
what he said but id go with the rsa if theres any way you can swing it i got an rsa few weeks ago (used) someone had ground the hammer to dust instead of adjusting it DOH anyway i emailed ken about getting a new hammer i told him what was going on and explained i got the fcg second hand and would like to buy a hammer he sent me a new hammer free of charge anyone who stands behind there produsts like this gets my vote 110% |
I really would like the RSA but I have another plan going and I can't swing it right now ...  I have an idea for a PBS-1 style suppressor that I want to get turned. The FCG was an afterthought, so I have to wait to get the good one, probably for a future 102 project ...  That's cool about Ken sending you a new hammer, Leupold has that same kind of policy with their scopes. No matter where you got it from if it's screwed up they'll fix it ... |
|
for the fake can give rick miller (nashnash ) a call he hooked me up i have a 16 in krink and a norm fake can wouldnt work and noone who makes fake cans wanted anythang to do with it rick said no prob and just made it heres really poor pic i still need to refinish whole rifle almost dont wanna finish the can its kinda got the bling goin on lol 
|
| I put a FSE in my Maadi. Was gritty as hell. Removed the FCG and did some judicious polishing of the parts. Basically I just removed the finish and some burrs on the bearing surfaces. NOw it has nice smooth two stage pull. I will use a G2 in my new Romanian build this time. Not that the FSE is bad, I just want to try a G2. |
I still have the 16in. threaded barrel, would that fit over it? It might be too long, ORF has a shorter one, I don't know if will fit right either ... There's a ton of machine shops up here, I should be able to get one turned cheap without much trouble ... |
AK Sponsor