AK Sponsor
Posted: 10/25/2004 3:03:35 AM EDT
| I have a barrel that threads into a milled receiver and want to uses it for a stamped receiver. Does anyone sell threaded trunnions. |
|
hoploholic gave you the most universally used method of using the old, threaded ak47 bbls. in a stamped rifle's trunnion. it is possible to thread a trunnion, but the cost is much higher than simply removing the threads. additionally, one has to worry about timing the threads so that the bbl. torques up with the gas tap hole/gas block/fsb vertical and the headspace within a correctable range. |
| thanks guys. What size do I have to take it down to. on the lathe. Looking at the barrel the end that goes into the trunnion only about an inch is threaded and the rest is smooth with a .905 diameter. Do I just take it down to that size. Where is a place to buy trunnions. |
AK Sponsor