Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
5441 Online
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
AR15.COM
bravocompany
My Account
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
JRH
skd
vortex
springfield
Holosun
geissele
DFC
bravocompany
silencerShop
Guns
palmetto
midwest
aim
cz
brownells
RS
primaryArms
colt
magpul
OSIGHT
fightlite
GS
5441 Online
magpul
cz
colt
vortex
RS
palmetto
aim
springfield
GS
brownells
bravocompany
geissele
OSIGHT
midwest
DFC
Holosun
primaryArms
fightlite
silencerShop
Guns
skd
JRH
AK Sponsor
Site News Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer
Sponsor News Introducing TNVC's NEW and Exclusive Filmed SuperGain (FSG) and Chimera Panoramic Goggle Giveaway!
5/6/2004 12:15:47 PM EDT
Firing today the trigger stopped resetting. It's an RSA trigger group. Only 80 rounds or less through the gun. I thought AK's are indestructible. It got really grity and hard, and then to reset it I have to push the trigger forward again with my finger. Reset spring? what?
5/6/2004 12:36:14 PM EDT
[#1]
Sounds like the disconector adjustment needs tweeking.  The RSA FCG is an awesome unit, but generally does need some inital adjustments.  If you didn't get instructions with your SEAK, go to redstararms.com   they have detailed "how to" on their FCG's
5/6/2004 3:32:23 PM EDT
[#2]
Contact Mike at ORF immediately and tell him what the trigger is doing.  Pics would be great if you can take them....


KF
5/6/2004 3:47:59 PM EDT
[#3]
Quoted:
Contact Mike at ORF immediately and tell him what the trigger is doing.  Pics would be great if you can take them....


KF


What's his email? Couldn't find it on the ORF website. There's really nothing to take pics of, although I have not opened the gun up yet.
5/6/2004 3:49:46 PM EDT
[#4]
you can email him at:

[email protected]

Take a look at the disconnector and see if it is intact.

KF
5/6/2004 3:55:17 PM EDT
[#5]
Got it. Didn't realize that Me223 was Mike. Did you forward him my email KF?
5/7/2004 5:17:18 AM EDT
[#6]
Could be that one of the hammer spring legs has slipped off of one of the trigger arms.  That will cause failure for the trigger to reset, and if the spring leg is rubbing against  the trigger arm it will feel "gritty."  

But it's most likely the RSA FCG has come out of adjustment.  I'd recommend cleaning the threads with acetone and using blue Loctite.  You must clean the threads as the Loctite will not work well on oily threads and the screws WILL back out.

Best,

Noah
5/7/2004 6:49:13 AM EDT
[#7]
"Could be that one of the hammer spring legs has slipped off of one of the trigger arms. That will cause failure for the trigger to reset, and if the spring leg is rubbing against the trigger arm it will feel "gritty."

Same thing with the Gordon set on my AMD63.

AK Sponsor
brownells
silencerShop
blackhills
THBRD
springfield
cmmg
gray
Pro2A
Faxxon
colt
fightlite
ar15com
LAPG
primaryArms
ar15com
geissele
LAPG
palmetto
RS
bravocompany
CA
SAS