AK Sponsor
Posted: 6/24/2003 6:10:16 AM EDT
|
About a month or two ago, I ordered and received my Krebs Custom AK-74 gas pistons. Doing a bit closer examination, and comparing to the pictures on the Krebs site, it looks like the Bulgarian gas pistons more closely match the AK-47/AKM pistons. The AK-74 pistons in the picture, like the ones I received, don't have the same lip on them that the AK-47/AKM and Bulgarian pistons do. Has anyone here used these pistons? Should I see if I can return the AK-74 pistons and exchange them for the AK-47/AKM pistons? |
|
Bump. Don't mean to be annoying or anything, just curious if anyone has ever had this issue. A couple of people told me that the US gas pistons not measuring the same length as the Bulgarian gas pistons wasn't an issue - that they just "had to be reasonably close". How accurate is this? |
| Kythri, this is what I was told about gas piston Lenghts, from a gunsmith that comes to this site.I asked the same question basicly. He said " as long as the piston( USA) isn't bottoming out in the gas block there isn't a problem with one being longer than lets say a ComBloc piston.Went on to say it will function fine and I will have NO PROBLEMS out of it.Im hoping this is what your looking for.I ordered a piston from Global trades and it was alittle longer than the piston ( Bulgy 74 ) that it was going to replace.Cheers WarDawg |
And I've just ordered one from Krebs.....so I guess we're gonna see. |
Talked to the guy on the phone and asked for the piston needed for an SAR-2. |
AK Sponsor