AK Sponsor
[ARCHIVED THREAD] - Russian Alpha AK clone Photo Thread (Page 1 of 2)
Posted: 6/4/2015 9:21:46 PM EDT
|
badass.
have you seen this? probably the easiest way to add an AR stock. |
|
I have, and though it seems to be an awesome product, I'm just not a fan of the fact that a buffer threads into the adapter instead of it being a one piece deal like the SRVV. My biggest gripe is how it elongates the stock and kind of looks awkward in my opinion. |
|
Quoted:
I have, and though it seems to be an awesome product, I'm just not a fan of the fact that a buffer threads into the adapter instead of it being a one piece deal like the SRVV. My biggest gripe is how it elongates the stock and kind of looks awkward in my opinion. Quoted:
I have, and though it seems to be an awesome product, I'm just not a fan of the fact that a buffer threads into the adapter instead of it being a one piece deal like the SRVV. My biggest gripe is how it elongates the stock and kind of looks awkward in my opinion. I give it a few months before the Russians rip it off |
|
Quoted:
I just had my AK sent off for the same chop and perm. I'm going a different route. Going all Zhukov furniture. Looks good though. That will look sick with Zhukov furniture. I was going to go that route until Larry Vickers did his Russian Alpha video and I had to have one... |
|
Quoted:
That will look sick with Zhukov furniture. I was going to go that route until Larry Vickers did his Russian Alpha video and I had to have one... Quoted:
Quoted:
I just had my AK sent off for the same chop and perm. I'm going a different route. Going all Zhukov furniture. Looks good though. That will look sick with Zhukov furniture. I was going to go that route until Larry Vickers did his Russian Alpha video and I had to have one... Im told cheap to buy the legit ak rail. So Im sinking 400 bucks into my wasr. That includes furniture, chop, flashhider, charging handle and sling. I plan on making my own krebs style safety. Some time with a dremel and a welder and I should be in it pretty cheap. Mine will wear a pro in an rs regulate mount. |
|
Quoted:
Yeah it's definitely better to start off a SLR-107CR or the like. The GB/FSB cost 100 and the work cost 150 for mine. Quoted:
Quoted:
Very very nice man. I wish it didn't cost an arm and a leg to get the front end work done like that. Yeah it's definitely better to start off a SLR-107CR or the like. The GB/FSB cost 100 and the work cost 150 for mine. Who does the front end work for 150? I've seen higher prices than that. |
This is a place holder for a build. Mine will be a bit shorter barrel as my base firearm is a Yugo M92 that I'm going to have a recommended smith put in a NDS EZ1 receiver. Really wish someone would make a 5.75" super extended cone for the M92/95, then I could ditch the fake can. I am having receiver swapped so that the Zhukov Folder stock can fit. Mine won't end up being a true clone, but it will be based on that concept.
This is how it sits now (basically). I've got a Midwest Industries MLOK w/T1 optic cover and PA-AMD on the way. Foregrip and Zhukove are laying on top of my safe alongside Blue Force AK sling, Strike Industries MLOK rail covers and an IWS MLOK sling clip point. ETA: I think I'm going to bug MW about coming up with an extended handguards for the Yugo (one that extends forward of the FSB and muzzle), which would ROCK for those with pinned and welded barrel extensions. |
|
Quoted:
Who does the front end work for 150? I've seen higher prices than that. Quoted:
Quoted:
Quoted:
Very very nice man. I wish it didn't cost an arm and a leg to get the front end work done like that. Yeah it's definitely better to start off a SLR-107CR or the like. The GB/FSB cost 100 and the work cost 150 for mine. Who does the front end work for 150? I've seen higher prices than that. I sent it out to Firing Line in Oklahoma. |
|
Quoted:
can't decide on handguard yet http://i61.photobucket.com/albums/h52/flanntastic/aim/20150423_195536_zpssuokufpo.jpg although i like my other start too http://i61.photobucket.com/albums/h52/flanntastic/aim/20150518_151300_zps2tvftxee.jpg What is the light on the first AK? |
|
Quoted:
What is the light on the first AK? Quoted:
Quoted:
can't decide on handguard yet http://i61.photobucket.com/albums/h52/flanntastic/aim/20150423_195536_zpssuokufpo.jpg although i like my other start too http://i61.photobucket.com/albums/h52/flanntastic/aim/20150518_151300_zps2tvftxee.jpg What is the light on the first AK? Looks like a Surefire on a RS mount. |
|
Quoted:
Wasn't trying for an "Alpha" clone, but here is what I came up with... <a href="http://s48.photobucket.com/user/mvician/media/AK47/P1200973_zps5b8830dd.jpg.html" target="_blank">http://i48.photobucket.com/albums/f240/mvician/AK47/P1200973_zps5b8830dd.jpg</a> <a href="http://s48.photobucket.com/user/mvician/media/AK47/P1210008_zps88cb29f8.jpg.html" target="_blank">http://i48.photobucket.com/albums/f240/mvician/AK47/P1210008_zps88cb29f8.jpg</a> hows the DTK-2 vs normal brake? |
|
Dang even that grip is pricey...good shot of an Alpha in VICE AK vid...
Alpha in VICE vid |
|
Awesome shots of the Alpha AK! I hadn't seen this video yet, thanks for sharing! |
|
Quoted:
My other guns are short and annoying. I don't care if it's loud for others  Just that it works goodIn case you weren't aware CNC Warrior makes a DTK2 clone for $45. http://www.cncwarrior.com/24mm-Compact-Brake-p/27388.htm |
|
Quoted:
In case you weren't aware CNC Warrior makes a DTK2 clone for $45. http://www.cncwarrior.com/24mm-Compact-Brake-p/27388.htm Quoted:
Quoted:
My other guns are short and annoying. I don't care if it's loud for others Just that it works goodIn case you weren't aware CNC Warrior makes a DTK2 clone for $45. http://www.cncwarrior.com/24mm-Compact-Brake-p/27388.htm Sold! |
Sorry for the terrible iTater pic. M92PAP w/pinned & welded fake can (16"+ total barrel length) Midwest Industries MLOK hand guard PA Advanced MDS CNCWarrior Hinge (left side folder) ACE Pig nose adapter LaRue/Magpul Urban Dark Earth CTR (it's what I had laying around) BFG AK sling Magpul Paraclip Adapter (get off your asses and make more paraclips, Magpul) Magpul VFG MLOK (Stealth Grey) Magpul MOE AK Grip (Stealth Grey) Strike Industies MLOK rail covers (planning on getting some G10 covers next month) Plan is to send the rifle off to Jeff Covino to have it transplanted into a NoDak Spud AKM reciever with a fixed stock single tang trunnion so I can put on the Zhukov that I have for it. I'll probably sell the Yugo reciever to someone who wants to build out their M92 kit with an original receiver. Also considering adding Krebs safety lever extension. Yea, I know, no TWS/Zenit topcover, but A. I'm not spending $350 on Zenit topcover/rail system (not sure it even exists for Yugo) B. Midwest system is rock solid, with lower 1/3rd co-witness. I don't wear a huge visor like those guys, so I don't need the riser for chin weld. Red dots work just fine moved out front in the scout position. |
|
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg Very cool. Did you get to shoot it as well? |
|
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg I really would like to know what stock adapter that is. It is not SRVV (since those are 5.5; unless he reworked the back of the receiver to take a 5.5) or JMac Customs. |
|
Got a 5.5 mil folder trunnion on my M92, planning on getting the TWS top cover for it, and the SRVV ar tube adapter for it. Just wish Zenit would make rails for them lol but that will never happen so go manticore!
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg Man that looks so sweet. |
|
Quoted:
I really would like to know what stock adapter that is. It is not SRVV (since those are 5.5; unless he reworked the back of the receiver to take a 5.5) or JMac Customs. Quoted:
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg I really would like to know what stock adapter that is. It is not SRVV (since those are 5.5; unless he reworked the back of the receiver to take a 5.5) or JMac Customs. If its still 4.5mm, I'd bet its the CAA adapter. The JMAC wasn't available when Vickers put that together. |
|
Quoted:
If its still 4.5mm, I'd bet its the CAA adapter. The JMAC wasn't available when Vickers put that together. Quoted:
Quoted:
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg I really would like to know what stock adapter that is. It is not SRVV (since those are 5.5; unless he reworked the back of the receiver to take a 5.5) or JMac Customs. If its still 4.5mm, I'd bet its the CAA adapter. The JMAC wasn't available when Vickers put that together. I'm not seeing anything of the sort on the CAA website. Got a link? |
|
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg Soooo jelly! 
|
|
Quoted:
I'm not seeing anything of the sort on the CAA website. Got a link? Quoted:
Quoted:
Quoted:
Quoted:
Here's a few pics I took of LAVs gun: http://i.imgur.com/95nLshOl.jpg http://i.imgur.com/J1X62aGl.jpg http://i.imgur.com/c4HMpvul.jpg I really would like to know what stock adapter that is. It is not SRVV (since those are 5.5; unless he reworked the back of the receiver to take a 5.5) or JMac Customs. If its still 4.5mm, I'd bet its the CAA adapter. The JMAC wasn't available when Vickers put that together. I'm not seeing anything of the sort on the CAA website. Got a link? I swear they used to have one for the folding rear trunnions, but it looks like they're gone now. |
|
Quoted:
Just installed my new ALG AKT and it feels awesome! Taking it to the range for the first time tomorrow, full video review to come soon! Here are some better photos... <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone1.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone1.jpg</a> <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone2.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone2.jpg</a> <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone3.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone3.jpg</a> <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone4.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone4.jpg</a> <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone5.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone5.jpg</a> <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone6.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone6.jpg</a> And the AKT- <a href="http://s1095.photobucket.com/user/StevenFBuis/media/AlphaAKclone7.jpg.html" target="_blank">http://i1095.photobucket.com/albums/i479/StevenFBuis/AlphaAKclone7.jpg</a> That looks fantastic! You nailed it. |
|
Quoted:
Huh. Don't see a 4.5 mm srvv tube on their website. Quoted:
Quoted:
LAV says it's a SRVV Side Folder @ 3:10 of his video http://www.srvv.org/en/catalog/1657/48954/ Huh. Don't see a 4.5 mm srvv tube on their website. SRVV doesn't offer a 4.5mm Tactube currently. LAV must of either replaced the rear trunnion to a 5.5mm or modified the Tactube to fit somehow... |
[ARCHIVED THREAD] - Russian Alpha AK clone Photo Thread (Page 1 of 2)
AK Sponsor