AK Sponsor
Posted: 12/20/2012 4:46:30 PM EDT
|
I have a Romey G kit that I want to have built using a Bulgarian Front Sight Block and Gas Chamber combination like this: Here
I don't really care for the 74 threads and will more then likely cut that off so that I can use standard breaks. Any idea where I could find one? I don't care if it is new or used, just as long as it is in good shape. This will go off to a builder. Any help on this is much appreciated. Thanks, Drew |
|
I picked one up from Desert Fox Sales, he sells them for $59, http://www.desertfoxsales.com/ProductDetails.asp?ProductCode=DFS-013 I'm using on a Saiga build, going for the CR107 look. |
|
Quoted:
I picked one up from Desert Fox Sales, he sells them for $59, http://www.desertfoxsales.com/ProductDetails.asp?ProductCode=DFS-013 I'm using on a Saiga build, going for the CR107 look. Never knew about this. Is this US made? |
|
Quoted:
Quoted:
I picked one up from Desert Fox Sales, he sells them for $59, http://www.desertfoxsales.com/ProductDetails.asp?ProductCode=DFS-013 I'm using on a Saiga build, going for the CR107 look. Never knew about this. Is this US made? Just shot him an email inquiring on your question. I will post the his reply. Thanks guys for the help. drew |
|
Quoted:
Quoted:
I picked one up from Desert Fox Sales, he sells them for $59, http://www.desertfoxsales.com/ProductDetails.asp?ProductCode=DFS-013 I'm using on a Saiga build, going for the CR107 look. Never knew about this. Is this US made? It's not chrome lined, so I'd say it's probably US made. |
|
Quoted:
Krebs used to make and sell one, but I am not seeing it on their site atm. Yeah.. I was looking for that the other day and never saw it on their site.. The Bolton looks sweet! I do have a complete 16" 5.56 front end from KVar with the bulgy combo gas/site that I haven't used yet 
|
|
Quoted:
Krebs used to make and sell one, but I am not seeing it on their site atm. Yeah.. I was looking for that the other day and never saw it on their site.. The Bolton looks sweet! I do have a complete 16" 5.56 front end from KVar with the bulgy combo gas/site that I haven't used yet
|
| I've considered the Bolton type for my Saiga .223 also. When I inquired about them on the Saiga site, I was told "there have been issues with them moving". No specifics, just that statement. The Krebs was the first one I'd ever considered, but they were discontinued on the site by the time I finally got around to ordering one. I did email them and was told they weren't making them anymore. But...that was quite some time ago. If enough people asked about them maybe they'd go back into production on them. Greg |
|
Quoted:
Quoted:
Quoted:
I picked one up from Desert Fox Sales, he sells them for $59, http://www.desertfoxsales.com/ProductDetails.asp?ProductCode=DFS-013 I'm using on a Saiga build, going for the CR107 look. Never knew about this. Is this US made? It's not chrome lined, so I'd say it's probably US made. I am not aware of any US made copies of that part. Could be some unfinished pieces that were brought in. Who knows. |
|
Quoted:
I've considered the Bolton type for my Saiga .223 also. When I inquired about them on the Saiga site, I was told "there have been issues with them moving". No specifics, just that statement. The Krebs was the first one I'd ever considered, but they were discontinued on the site by the time I finally got around to ordering one. I did email them and was told they weren't making them anymore. But...that was quite some time ago. If enough people asked about them maybe they'd go back into production on them. Greg they do them every now and the, call them if needed. |
|
That's a shame about the Krebs units. I just bought some about maybe four months ago. I haven't used them yet but they are chrome lined and look good.
http://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/krebs-custom-ak-104k-carbine-detail.html?Itemid=0 I didn't want the threads or plunger hole either. I would call them maybe they could come up with one. |
|
That just looks like the drum is in lightly off angle. should be able to straighten it up.
advntrjnky Quoted:
Here are some pictures of the one that I picked up from Desert Fox, my only complaint with it is that the front site post hole is going to need to be opened up to allow the site to move for windage. http://i186.photobucket.com/albums/x66/biffjr99/IMG_1959.jpg http://i186.photobucket.com/albums/x66/biffjr99/IMG_1960.jpg http://i186.photobucket.com/albums/x66/biffjr99/IMG_1961.jpg http://i186.photobucket.com/albums/x66/biffjr99/IMG_1962.jpg http://i186.photobucket.com/albums/x66/biffjr99/IMG_1963.jpg |
AK Sponsor