AK Sponsor
Posted: 7/23/2012 7:17:13 AM EDT
I bought a stock from K-VAR and I have found that the cleaning kit does not come out without taking the buttplate off. Has anyone else had this problem? The cleaning kit tilts up and doesn't clear the hole.
|
|
I've had the same problem with all of the K-Var stocks I've bought, but I fixed them.
There's a black block inside the stock that the sling swivel screws into. There is a piece of plastic on each side of the stock that rests on top of that block and under the spring. Take some sandpaper and scratch down the tops of the two plastic pieces, mostly on the end closest to you. It shouldn't take longer than 15 minutes or so. |
|
Quoted:
I've had the same problem with all of the K-Var stocks I've bought, but I fixed them. There's a black block inside the stock that the sling swivel screws into. There is a piece of plastic on each side of the stock that rests on top of that block and under the spring. Take some sandpaper and scratch down the tops of the two plastic pieces, mostly on the end closest to you. It shouldn't take longer that 15 minutes or so. This worked great. Thanks! |
|
Quoted:
Quoted:
I've had the same problem with all of the K-Var stocks I've bought, but I fixed them. There's a black block inside the stock that the sling swivel screws into. There is a piece of plastic on each side of the stock that rests on top of that block and under the spring. Take some sandpaper and scratch down the tops of the two plastic pieces, mostly on the end closest to you. It shouldn't take longer than 15 minutes or so. This worked great. Thanks! Happy to help 
|
|
Quoted:
Quoted:
Quoted:
I've had the same problem with all of the K-Var stocks I've bought, but I fixed them. There's a black block inside the stock that the sling swivel screws into. There is a piece of plastic on each side of the stock that rests on top of that block and under the spring. Take some sandpaper and scratch down the tops of the two plastic pieces, mostly on the end closest to you. It shouldn't take longer than 15 minutes or so. This worked great. Thanks! Happy to help Adding my thanks as well. Did some sanding today to fix that problem like you said.
|
|
Quoted:
Quoted:
Quoted:
Quoted:
I've had the same problem with all of the K-Var stocks I've bought, but I fixed them. There's a black block inside the stock that the sling swivel screws into. There is a piece of plastic on each side of the stock that rests on top of that block and under the spring. Take some sandpaper and scratch down the tops of the two plastic pieces, mostly on the end closest to you. It shouldn't take longer than 15 minutes or so. This worked great. Thanks! Happy to help Adding my thanks as well. Did some sanding today to fix that problem like you said. 
|
AK Sponsor