Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AK Sponsor
2/19/2011 7:41:59 PM EDT
Which AK/AKMs in  had these and are they not seen on Romanian Variants ??
2/19/2011 7:54:24 PM EDT
[#1]
My MAK90 has it.
2/19/2011 8:01:22 PM EDT
[#2]
Quoted:
My MAK90 has it.


I looked through over 200 Romanian AK/AKM pics in various forum/boards and only saw 3 with a vented Gas Tube ...
2/19/2011 9:12:59 PM EDT
[#3]
As far as I know all the Romanian rifles had vents in the gas block and not the tube. I believe the very early Russian, and a lot of the Chinese rifles were the only ones with vented tubes. That said it does not matter in the function of the rifle at all. Some rifles (new Saiga's) have no vents in the block or tube from the factory. With my limited and non-scientific testing it seems like the vents only serve to help force debris out of the gas system instead of depositing it on your carrier/piston, and into your receiver and under your sight block.
2/19/2011 9:13:14 PM EDT
[#4]
Quoted:
Which AK/AKMs in  had these and are they not seen on Romanian Variants ??


Not on the Romanian AKM rifles.  You'll see the holes on the gas tubes of the Hungarian AMM/AMMS (AKM/AKMS) rifles.
2/20/2011 3:06:21 AM EDT
[#5]
My Bulgarian sporters have them.

Posted Via AR15.Com Mobile
2/20/2011 3:08:32 AM EDT
[#6]
My Yugo M72 build has them...     but I put them there. It was over gassed

I've only seen chicoms with them..
2/20/2011 4:20:48 AM EDT
[#7]
My Hungarian SA 85 came with one, but the block is also vented
2/20/2011 5:46:44 AM EDT
[#8]
The Romanian rifles you're referring to probably have an Ultimak gas tube like mine. I got the one with the holes in it even though I didn't need it. That's just what they sent me because the other style was out of stock.
2/20/2011 7:21:46 AM EDT
[#9]
I have a Polish gas tube laying around here somewhere that has them.  I have no clue whether it came from a stamped gun or not.
2/20/2011 7:28:04 AM EDT
[#10]
The original AK had vents in the gas tube.
That was changed when the AKM was introduced. It vents through the block.
The Chinese did not copy the AKM design. They produced a rifle with a stamped receiver which had most of the other features of the AK - barrel diameter, double hook trigger, vented tube, stock drop, etc.
ETA: The tubes are interchangable without any effect on operation, but if you use a non-vented tube on a non-vented block you get more powder residue in the tube and receiver.
AK Sponsor