Will I have any issues threading the end of a 7.62x39 barrel with 1/2-28 threads? Is 3/32" cross-section thick enough in this area at the muzzle of the barrel?
Posted: 1/16/2011 1:15:23 PM EDT
[#1]
I personally wouldn't cut it that close but it has been done.
Posted: 1/16/2011 6:34:02 PM EDT
[#2]
my psl is cut 1/2 x 28 and it works just fine.
Posted: 1/16/2011 7:14:31 PM EDT
[#3]
When you have a MAK 90 where the muzzle has been turned down so it can't be threaded the proper 14mm, then 1/2x28 is the next size down, & what people use. AK style slant brakes & muzzle nuts are available in that size. GARY N4KVE
Posted: 1/17/2011 3:52:57 AM EDT
[#4]
ADCO may be able to turn the barrel down and install a 1/2 x 28 threaded sleeve if there will be sufficient barrel thickness left between the bore and sleeve.
