AK Sponsor
Posted: 6/29/2010 7:48:50 PM EDT
|
How hard would it be to put a scope rail on the side or my romy under folder?? Sorry if its been asked before. My search fu is lacking.
Scott |
|
You could mount a Yugoslavian M89 side rail, which is designed to work with underfolders. Because the rail mounts higher than normal to clear the folding stock, optic height becomes an issue. The M89 rail accepts PSL/SVD mounts. There is a thread now in the archives where I went into great detail on this subject, I'll dig it out if you want me to. |
|
Quoted:
You could mount a Yugoslavian M89 side rail, which is designed to work with underfolders. Because the rail mounts higher than normal to clear the folding stock, optic height becomes an issue. The M89 rail accepts PSL/SVD mounts. There is a thread now in the archives where I went into great detail on this subject, I'll dig it out if you want me to. Could ya dig it out. that would be much appreciated. Scott |
|
Need a rear tang to use the current TWS Dogleg rail. Romy underfolders lack the tang. Keep in mind that even if you never intend to fold the stock, the mount slides onto the rail from the rear. With a side rail in the customary location, it is highly likely the folding mechanism on the receiver will be in the way. |
|
Quoted:
Need a rear tang to use the current TWS Dogleg rail. Romy underfolders lack the tang. Keep in mind that even if you never intend to fold the stock, the mount slides onto the rail from the rear. With a side rail in the customary location, it is highly likely the folding mechanism on the receiver will be in the way. Oh, my bad! I forgot about the rear tang!! |
AK Sponsor