AK Sponsor
Posted: 10/12/2005 6:20:12 AM EDT
|
FROM AIMPOINT'S WEBSITE: Aimpoint CompM2 Heavy-duty variants of the CompC built for extreme conditions. This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions. The CompM2 is compatible with all generations night vision devices but is otherwise identical in construction to the CompML2. At the lowest brightness setting (for night-time use with NVD) there is no need for an “off” position on the switch. No sight on the market can rival the light transmission through an Aimpoint sight in both the visible and IR ranges/spectra. This becomes especially obvious in dim conditions. The CompM2 has 4 NVD settings to give an extremely clear reticle in dark conditions. The inner tube is suspended in a unique spherical joint – large view, greater (+/- 2.5 meters) adjustment range at 100 meters with repeatable, accurate click adjustments. Guaranteed submersible to 25 m without tightening the adjustment caps. Tests have been successful down to 100 m. CompM2 red dot sight can be mounted on almost any type of rifle and with the co-witnessing (applicable to many small calibre weapons) the iron sights are visible through the sight as a back-up. There is also a quick-release ring for Picatinny or Weaver bases, allowing the sight to be rapidly detached and remounted without zeroing. odel CompM2 OPTICAL DATA System Parallax Free, Reflex, Collimator System Magnification No magnification (1X) Eye relief Unlimited, No centering required Reticle, size Red dot, diameter 4 MOA* Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility ELECTRONIC DATA Battery One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life** 1.000–10.000 hours average. Typically 10 years at NVD position Switch, dot brightness 10 positions, 4 NVD, 6 daylight, of which 1 Extra Bright MECHANICAL DATA Material housing Extruded, high strength aluminium Surface finish Hard anodized, matte, Graphite Gray Material lens covers Thermoplastic Elastomer, black non-glare Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds Mounting 1 ring 30 mm or Aimpoint QR DIMENSIONS Length 130 mm (5.1") Width/height 55 mm (2.2") Ring width Max 30 mm (1.2") Weight 200 grams (7.1 oz) ENVIRONMENTAL DATA Temperature Range -45ºC to +70ºC (-50ºF to +160ºF) Water resistance Submersible to 25 m (80ft) water depth *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1" at 100 yards **CET: All models beside Aimpoint 3000 have the new CETechnology Dimensions and weights for CompML2 and CompM2 are given with Flip-Up Lens Covers ALL SPECIFICATIONS ARE TYPICAL AND SUBJECT TO CHANGE WITHOUT NOTICE. © 2000 AIMPOINT AB. ED. 18-OCT-01 Aimpoint CompML2 Heavy-duty variants of the CompC built for extreme conditions. This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions. The inner tube is suspended in a unique spherical joint – large view, greater (+/- 2.5 meters) adjustment range at 100 meters with repeatable, accurate click adjustments. Guaranteed submersible to 25 m without tightening the adjustment caps. Tests have been successful down to 100 m. CompML2 red dot sight can be mounted on almost any type of rifle and with the co-witnessing (applicable to many small calibre weapons) the iron sights are visible through the sight as a back-up. There is also a quick-release ring for Picatinny or Weaver bases, allowing the sight to be rapidly detached and remounted without zeroing. Model CompM2 OPTICAL DATA System Parallax Free, Reflex, Collimator System Magnification No magnification (1X) Eye relief Unlimited, No centering required Reticle, size Red dot, diameter 4 MOA* Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility ELECTRONIC DATA Battery One 3 Volt Lithium battery type 2L76 or DL1/3N Battery Life** 1.000–10.000 hours average. Typically 10 years at NVD position Switch, dot brightness 10 positions, 4 NVD, 6 daylight, of which 1 Extra Bright MECHANICAL DATA Material housing Extruded, high strength aluminium Surface finish Hard anodized, matte, Graphite Gray Material lens covers Thermoplastic Elastomer, black non-glare Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds Mounting 1 ring 30 mm or Aimpoint QR DIMENSIONS Length 130 mm (5.1") Width/height 55 mm (2.2") Ring width Max 30 mm (1.2") Weight 200 grams (7.1 oz) ENVIRONMENTAL DATA Temperature Range -45ºC to +70ºC (-50ºF to +160ºF) Water resistance Submersible to 25 m (80ft) water depth *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1" at 100 yards **CET: All models beside Aimpoint 3000 have the new CETechnology Dimensions and weights for CompML2 and CompM2 are given with Flip-Up Lens Covers ALL SPECIFICATIONS ARE TYPICAL AND SUBJECT TO CHANGE WITHOUT NOTICE. © 2000 AIMPOINT AB. ED. 18-OCT-01 |
AK Sponsor