AK Sponsor
| thats right, you gotta knock out the 2 pins and (if you dont have to press them out because sometimes they can really be a pain in the ass). the next step is to find a good rubber mallet or something that wont beat up your finish and give it some good taps to work it loose and wherever you need to move it. and if the alignment looks good, put your pins back in, i would highly recomend using something flat like a hard peice of wood and then tap it with your hammer and work it in, just a hammer alone can shroom the pins out and it dont take much sometimes. and one last thing, when you take the pins out you punch them out from right to left from the muzzle end. |
AK Sponsor